Installation Guide

3
Congratulations on your purchase of an Earth’s Flame fireplace grate. Earth’s Flame
has been tested and shown to reduce harmful emissions to the environment, increase
radiant heat from your fireplace, and reduce Carbon Monoxide spillage into your living
space. If you have not done so already, you need to determine that Earth’s Flame will
fit properly within your fireplace and operate safely.
Will Earth’s Flame Fit in My Fireplace?
Earth’s Flame is adjustable to fit most 36” – 42” fireplaces. This appliance has specific
sizing requirements for safe operation and may not fit or operate safely in all code
compliant fireplace systems. Please review all the requirements listed below PRIOR to
assembly or installation. If you are unsure how to properly take these measurements we
recommend that you contact a F.I.R.E. Certified Inspector (www.gotoFIRE.com) or
equally qualified hearth professional. There are some fireplaces where Earth’s Flame
will not fit or operate properly. An updated list of these fireplaces can be found @
www.earthsflame.com under the Technical Features Tab – “Will it Fit”. Earth’s Flame
recommends you review this list prior to any attempted installation.
Minimum Required Fireplace Floor - Width and Depth
The back wall of the fireplace must be greater than 18” across. The depth of the floor
measured from the back wall must be greater than 13 1/2”. The width of the floor
measured 12 ½” from the back wall must greater than 26” wide.