User's Manual

GPR4 Concrete Scanner
–
User Manual
D
-
000002
-
000021
Earth Science Systems, LLC
February
29
,
2019
Copyright © 2019 ESS, LLC. All rights reserved. Page 17 of 28
into dialog field, click on the field to place the cursor, then press the icon on the
taskbar to bring up the keyboard.
a. Grid type Select either Single line, Parallel lines, or 2D grid (cross hatch). When
conducting pavement surveys, select either Single line or Parallel lines
depending in the width of the area to be scanned.
b. Line directions Select either Same direction or Alternating.
c. Lines in X-axis direction These parameters specify the beginning and ending
coordinates of the lines in the X-direction, and also the distance between them.
d. Lines in Y-axis direction These parameters specify the beginning and ending
coordinates of the lines in the Y-direction, and also the distance between them.
Because lines in the Y-direction are not used for pavement scanning, these fields
can be ignored.
e. Saving the configuration The New, Open, Save, and Delete buttons can be used
to save/recall the dialog settings to/from a named configuration. This is useful
when conducting a series of jobs with a similar layout.