Portable Massage Table Setup Guide • Avalon XD Tilt • Avalon XD • Calistoga • Harmony DX • Infinity • Infinity Conforma • Luna • MediSport • Spirit • Spirit Pregnancy
Opening Your Table Congratulations on your portable massage table purchase. This setup guide will assist you in each step of the setup process. 1 2 Prop your table upright onto the rubber feet and unlock both latches. 3 Open the table until you feel a slight resistence coming from the cables. Make sure that none of the cables are tangled around the legs, this will prevent the table from opening completely. Open all four legs of the table to full extension. Straighten the table as much as possible.
Height Adjustment Lean the table on its side and adjust the legs to a desirable height with the following steps. Assure all the legs are adjusted to the same level. When one side is adjusted, flip the table over and conduct the same steps on the remaining legs. The height on your massage table can be adjusted by approximately 10” in additional height, depending on which model of table you purchased. Approx. 10” 1 Loosen the rubber knob by turning it counter clockwise, and seperate it from the leg and frame.
Lifetime Limited Warranty Portable Tables, Chairs & Headrests We guarantee our portable tables and chairs, excluding foam and upholstery, against defects in material and workmanship for as long as you, the original purchaser, own the product, or for five (5) years after the product is discontinued or modified. Foam, upholstery, and platforms are warranted for three (3) years from the original date of purchase.
