Specifications

Last Updated 5/7/13
10
AUTO and Economy Operation
AUTO Operation
 When you set the heat pump mini-
split in AUTO mode, it will
automatically select cooling or fan
only operation depending on what
temperature you have selected
and the room temperature.
 The heat pump mini-split will
control room temperature
automatically based on the
temperature point set by you.
 If the AUTO mode is
uncomfortable, you can manually
select.
Economy Operation
When you push the ECONOMY button
on the remote controller during
cooling, heating or AUTO operation,
the heat pump mini-split will
automatically increase (cooling) or
decrease (heating) the set
temperature by 2 degrees F per hour
for 2 hours, hold steady for the next 5
hours, and then turn off. This
characteristic maintains both energy
saving and comfort in night operation.
Dehumidification
The fan speed will be automatically
controlled under this operation.
During this operation, if the room
temperature is lower than 50ºF (10º C)
the compressor stops operation and
restarts when the room temperature is
above 54º F (12ºC).
Optimal Operation
To achieve optimal performance,
please note the following:
 Adjust the temperature to achieve
the highest comfort level. Do not
adjust the heat pump mini-split to
excessive temperature levels.
 Close doors and windows on COOL
or HEAT modes; otherwise,
performance will be reduced.
 Use TIMER ON button on the
remote controller to select a time you
want to start your heat pump mini-
split.
 Do not put any object near air inlet
or air outlet, as the efficiency of the
heat pump mini-split will be reduced
and the heat pump mini-split may
stop running.