Specifications

Last Updated 5/7/13
12
air filter support brace (making sure
the left and right filter edges are
positioned properly on the rails) and
firmly slide filter back into position
until both tabs are secured into the
front frame. Insert the right-side air
filter using the same process.
7. Release plastic panel brace by
pulling the front panel slightly
outward (toward you) and push the
panel brace back down to its original
position.
8. To re-attach the front panel to the
indoor air handler, lift the left plastic
crank (located on the unit) up (using
the index and middle fingers from
under the panel) and align the fixing
hole on the back of the front panel to
the plastic crank on the indoor air
handler. Then, firmly press the panel
inwards to make the crank link with
the panel. Repeat the same process
for the right side.
9. The panel will completely close
automatically once the heat pump
mini-split is turned on.