Specifications

Last Updated 5/7/13
22
Cooling /Heating/Fan
Operation
Ensure the heat pump mini-split is
plugged in and power is available.
1. Press the MODE button to select
COOL, HEAT, or FAN mode.
2. Press the TEMP button to set the
desired temperature. The temperature
can be set within a range of 62 F in 2
degree F increments to 88 degrees F.
3. Press the FAN SPEED button to
select the fan speed in four steps-
Auto, Low, Medium, or High.
4. Press the ON/OFF button to start
the heat pump mini-split.
NOTE:
In the FAN mode, the setting
temperature is not displayed in the
remote controller and you are not able
to control the room temperature either.
In this case, only step 1, 3 and 4 may
be performed.