Specifications

Last Updated 5/7/13
7
Special Functions
Defrost Operation Display
Displayed when the heat pump mini-
split starts defrosting automatically or
when the warm air control feature is
activated in heating operation.
Operation Frequency Display
This display is separated into five
zones. The zones illuminate based
on the compressor current
frequency. For example, higher
frequency will illuminate more zones.
Indoor Air Handler
1. Display Window
2. Front Panel
3. Panel Frame
4. Chassis
5. Air Filter
6. Panel Brace
7. Manual Control Button
8. Connecting Pipe
9. Drain Hose
10. Remote Controller
Outdoor Condenser
12. Connecting Cable
13. Line Set
14. Service Valve
Digital Display
Displays the current setting
temperature and malfunction
code when the heat pump mini-
split is in operation.
AUTO Operation Display
Displayed during Auto operation.
Timer Display
Displayed during timer operation.
Operating Temperatures
Mode
Cooling Temperature
Heating Operation
Drying Operation
Room Temperature
≥ 62º F or 17º C
≤ 88º F or 31º C
> 50º F or 10º C
Outdoor
Temperature
32º F – 122º F
0º C – 50º C
5º F - 86º F
-15º C - 31º C
32º F - 122º F
0º C - 50º C
Note:
1. Optimum performance will be achieved within these operating temperatures. If
heat pump mini-split is used outside of the above conditions, certain safety
protection features might come into operation and cause the heat pump mini-
split to function abnormally.
2. Room relative humidity less than 80%. If the heat pump mini-split operates in
excess of this figure, the surface of the heat pump mini-split may attract
condensation. Please set the vertical air flow louver to its maximum angle
(vertically to the floor) and set HIGH fan mode.