Specifications

Last Updated 5/7/13
8
Manual Operation
Manual operation can be used temporarily in case the remote controller is
disabled or when maintenance is necessary.
NOTE: The heat pump mini-split must
be turned off before operating the
“manual control” button. If the heat
pump mini-split is operational,
continue pressing the manual control
button until the unit is off.
1. For the convenience of operation,
the manual control button is located
on the right side of the panel frame.
2. One press of the manual control
button will lead to the forced AUTO
operation at a fixed temperature of
76° F. The temperature cannot be
adjusted manually. Pressing the
button a second time will put the
heat pump mini-split into the “cool”
operation. Pressing the button a
third time will turn the heat pump
mini-split off.
CAUTION: This button is used for
testing purposes and to be used by
service personnel only.
Airflow Direction Control
 Adjust the air flow direction properly;
otherwise, it might cause discomfort or
uneven room temperatures.
 Adjust the horizontal louver using the
remote controller.