Earthquake Tactile Transducers Q10B MQB-1 Users Manual Sound That Will Move You. www.earthquakesound.
Earthquake® Tactile Transducers Basic Information By now, you may have some knowledge about Tactile Transducers. To help clarify this application further, please read on: What is a Tactile Transducer? Mounting Quake Tactile Transducers A tactile transducer or "bass shaker" is a device which is made on the principle that low bass frequencies can be felt as well as heard. A shaker transmits low-frequency vibrations into various surfaces so that they can be felt by people. This is called tactile sound.
How To Connect to an Amplifier Tools that will be needed for installation: - 16 to 12-gauge speaker cable - a pair of pliers - a powered screw driver - measuring tape - two (2) wing nut wire connectors or electrical tape XJ-600R CONNECTION OPTIONS Receiver or Pre-amp Receiver or Pre-amp LFE / Subwoofer Out LFE / Subwoofer Out XJ-600R XJ-600R CH2 CH1 CH2 Speaker Outputs CH1 Speaker Outputs MQB-1 3-Ohm Parallel Application MQB-1 2-Ohm Parallel Application Receiver or Pre-amp Receiver or Pre-a
How To Connect to an Amplifier Tools that will be needed for installation: - 16 to 12-gauge speaker cable - a pair of pliers - a powered screw driver - measuring tape - two (2) wing nut wire connectors or electrical tape XJ-300R CONNECTION OPTIONS Receiver or Pre-amp Receiver or Pre-amp LFE / Subwoofer Out LFE / Subwoofer Out R- L+ + 110-120V 220-240V LINE IN L+ L WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE NO USER SERVICEABLE PARTS INSIDE.
Recommended XJ-600R / XJ-300R Front Panel Settings The 20Hz Setting Should Be Set To Max +6dB SUBSONIC Set to -6dB Minimum Set to -6dB Minimum ON The Subsonic Filter Should Be Set To The OFF Position ROOM CORRECTION 20Hz 30Hz IN 40Hz The IN/OUT Switch Should Be Set To "IN" OFF -6dB +6dB -6dB +6dB -6dB +6dB OUT This Setting Can Be Set To Personal Preference.
How To Mount Directly To Furniture Applications 3 Sofas 3 Theater Chairs 3 Recliners Mounting 3 Direct 3 Multiplier 3 Internally 3 Externally MQB-1 Side Mount Multiplier Back of Sofa MQB-1 MQB-1 Side Mount Multiplier Strongest Joist / Brace in Sofa or Chair Q10B Side Mount Multiplier Back of Sofa Q10B Enhancements 3 Home Theater 3 Music Multiplier Options 6 Q10B Side Mount Multiplier Strongest Joist / Brace in Sofa or Chair MQB-1 Side Mount Multiplier Q10B Side Mount Multiplier www.earthquakesound.
How To Mount To a Platform Applications 3 Sofas 3 Theater Chairs 3 Recliners Mounting When designing your custom platform, be sure to allow 11/2 to 2 feet of space around the outer perimeter of the chairs or couch. This much space is not required in between the chairs. All platforms should be constructed with no less than 1/2" plywood and built sturdy for some seriously high speed entertainment.
How To Mount To a Throne or a Game Chair Applications 3 Office Chairs 3 Thrones 3 Game Chairs Mounting MQB-1 Gaming Multiplier Rotating Chair or Throne Rotating Chair Pole Piece MQB-1 MQB-1 Gaming Multiplier 3 Direct 3 Multiplier MQB-1 Gaming Multiplier Enhancements 3 Gaming 3 Music 3 Music Recording Pre-built gaming chairs come in all different shapes and sizes. The illustration to the right is only a demonstration on how you may install a MQB-1 to this type of application.
Specifications and Support MQB-1 Specifications: • • • • 15 - 50Hz frequency response 8Ω impedance 20-500 Watts Dimensions: H = 3 1/2" • 88.9mm W = 3 1/8" • 79.375mm D = 3 1/8" • 79.375mm Q10B Specifications: • • • • 5 - 40Hz frequency response 8Ω impedance 40-1000 Watts Dimensions: H = 3 9/16" • 90.4875mm W = 6 3/16" • 157.1625mm D = 3 9/16" • 90.
5-Year Limited Warranty Earthquake warrants the original purchaser that all Factory Sealed New Audio Products to be free from defects in material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on the original purchase receipt with serial number affixed/written on it).
Sound That Will Move You. Earthquake Sound Corporation 1-800-576-7944, 9:00 am - 5:00 pm Mon-Fri, Pacific Time 2727 McCone Avenue Hayward, CA 94545, USA www.earthquakesound.
