OPERATING INSTRUCTIONS & Parts EXPLOSIONS FRONT TINE ROTOTILLERs 3365 6.50 TORQUE RATED BRIGGS 3365CE 6.50 TORQUE RATED briggs 3365PS 6.50 TORQUE RATED BRIGGS R3355H 5.5 HP HONDA ARDISAM .com OMFT07 Rev. 1/18/07 © Copyright 2007 Ardisam, Inc. All Rights Reserved. Printed in USA.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models INTRODUCTION WARRANTY Thank You . . . for purchasing an Earthquake® forward rotating front tine rototiller from Ardisam, Inc. We have worked to ensure that this front tine rototiller meets high standards for usability and durability. With proper care, your rototiller will provide many years of service. Please take the time to read this manual carefully to learn how to correctly operate and maintain your rototiller.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models SAFETY OWNER’S RESPONSIBILITY Accurate assembly and safe and effective use of the rototiller is the owner’s responsibility. • Read and follow all safety instructions. • Carefully follow all assembly instructions. • Maintain the tiller according to directions and schedule included in this Earthquake operator’s manual. • Ensure that anyone who uses the tiller is familiar with all controls and safety precautions.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models c. Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. d. Replace gasoline cap securely and clean up spilled fuel before restarting. • Never attempt to make any adjustments while the engine is running. Operation • Do not operate the tiller under the influence of alcohol or drugs.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models SAFETY DECALS This rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models Unpacking and Assembly unpack tiller & assemble 1. Open top of carton and remove handlebar assembly. 2. Find parts packet.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models Features (3365/3365Ce) The advantage of the EARTHQUAKE® BADGER™ gear drive rototiller over other front tine tillers, is the exclusive unfolding and flexible drag bar. This gives the Earthquake® Badger™ gear drive tiller its stability and its versatility. For easy transport, fold the wheels under the engine. During operation, the wheels unfold back and the drag bar folds down.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models controls Drive SAFETY Control Lever ! CAUTION BELT TENSION ADJUSTMENT This information is provided here only to introduce the controls. DO NOT START THE ENGINE AT THIS TIME. Starting and operating instructions are given on page 10. Please read this section and all operating and safety instructions before starting your tiller. Proper belt tension is critical to good performance.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models OperatioN PRE-START INSPECTIOn 1. Make sure all safety guards are in place and all nuts and bolts are secure. 2. Check oil level in engine crankcase. See your engine manual for procedure and specifications. 3. Inspect air cleaner for cleanliness. See your engine manual for procedure. 4. Check the fuel supply. Fill the fuel tank no closer than 1 inch from top of tank to provide space for expansion. See your engine manual for fuel recommendations.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models Operating Speed For normal tilling, set the throttle lever to “fast”. SHUTTING DOWN To stop the engine at any time, move throttle control to the off position. To stop wheels and tines at any time, release the drive safety control lever to the neutral position. Tilling 1. Adjust the depth regulator lever to desired tilling depth. NOTE: Raise depth regulator lever up one hole at a time, testing tiller operation after each raise.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models MAINTENANCE AND STORAGE MAINTENANCE SCHEDULE Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you with years of reliable operation. Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance. Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models Check Belt Tension Belt tension may decrease over time. It must be adjusted within the first half hour of operation, and checked after every two hours of operation. Proper adjustment will assure long belt life. Too much or too little belt tension will cause premature belt failure. To check and adjust the forward belt tension: ! WARNING Check forward belt tension regularly. Too much or too little tension will cause premature belt failure. 1.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models Engine Maintenance Refer to the engine manual included in your parts packet for information on engine maintenance. Your engine manual provides detailed information and a maintenance schedule for performing the following tasks: 1. Check oil level before each use or after every 8 hours of operation. 2. Change oil after first 5-8 hours of operation. Change oil while engine is warm. Refill with new oil of recommended grade. 4.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models storage Prepare for Storage Follow the steps below to prepare your tiller for storage. Read your engine manual for detailed instructions on preparing the engine for storage. 1. Protect wheels and axles from rust: - Coat the axles lightly with axle grease. ! WARNING Do not store tiller in an unventilated area where fuel fumes may reach flame, sparks, pilot lights or an ignited object. Drain fuel outdoors away from any ignition sources.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models Troubleshooting and Repair ! WARNING Troubleshooting Guide Practice safety at all times. Engine must be turned off and allowed to cool, and spark plug wire must be disconnected and secured before attempting any maintenance or repair. While normal care and routine maintenance will extend the life of your rototiller, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly.
800-345-6007 DECLARATION DE CONFORMITE DECLARATION DE CONFORMIDAD DICHIARAZIONE DI CONFORMITÀ 3365CE MODELLO NR. N° DE PRODUCTO PRODUKTNR. PRODUKTIONSNR. PRODUKT-NR. . ° EARTHQUAKE DESCR.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models 3365/3365ce Handlebar parts 3262 3268 53607 3170 53606 53620 3269, 3604 3108A 48406 48406 3335 8655 504 90141 PART # DESCRIPTION QTY. 3108A CABLE ASSEMBLY W/FERREL 1 3170 NUT, PUSH 3/8” DIA.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models 3365PS/R3355H Handlebar parts 53650 53632 53612 53614 53631 53620 3359 3353 503 53629 103 53606 53607 2102 60G56 2104 48406 105 504 3358 101A 3108A MODEL R3365H 90138 2104 PART # DESCRIPTION 503 BOLT, HH 5/16-18 X 1-1/2” 1 504 LOCKWASHER, SPRING 5/16” 2 2 53606 NUT, HEX NYLOC 10-24 1 2 53607 NUT, HEX JAM 5/16-24 2 LINK 11-5/8” LONG 1 PART # DESCRIPTION QTY.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models 3365/3365CE/3365PS motor mount & Hood parts R3365H motor mount & Hood parts 60G56 3305, 3305CE 33055 WK6 31781 809 719 802 63118 31782 3130A 3196 WL14 802 67538 744 1407 717 1416 WF516 60G56 1413 2104 3275D 67538 3182A 53730 1418 53596B 3360 3370 WF516 3128 67538 48261 3335 8930 53106 3371 MODEL 3365PS & R3365H BUMPER Page 20 800-345-6007
OPERATING INSTRUCTIONS and parts explosions Front Tine Models motor mount & Hood parts PART # DESCRIPTION 1401 BOLT, HHCS 5/16-18 X 1-1/4” GR5 (3365, 3365CE, 3365PS) 1407 QTY. PART # DESCRIPTION QTY.
OPERATING INSTRUCTIONS and parts explosions Front Tine Models tines & 1” shaft PARTS 504 504 PART # DESCRIPTION PART # DESCRIPTION 1511 BOLT, SFHH 1/4-20 X 7/8” 1601 BEARING, TAPERED (INCLUDES CONE & RACE) 9 3326 TINE SET, OUTSIDE LEFT 1 1 3364 KEY 3/16 X 1/2” 1 1701 KEY, HALF MOON 1/4 X 1” 1 504 LOCKWASHER, SPRING 5/16” 5 1810 SNAP RING, EXTERNAL 2 56100B CASTING, RIGHT SIDE 1 3116 GEAR, BRASS 1” ID 1 56101B CASTING, LEFT SIDE 1 60G56 NUT, BI-WAY LOCK 5/16-18 3122 S
ARDISAM .com Visit www.ardisam.com and discover more innovations that will benefit you throughout the year. Earthquake, Division of Ardisam, Inc. 1690 Elm Street; P.O. Box 666 Cumberland, Wisconsin 54829 800-345-6007 · Fax (715) 822-2223 E-mail: info@ardisam.
