Car Amplifier User Manual

ManualsBrandsEarthquake Sound ManualsCar AmplifierT1000W/2

Earthquake Sound reserves the right to amend details of the specifications without notice.

Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Tel 510-732-1000

TNT Series Amplifiers

Owners Manual

T500W/2

T1000W/2

T2000W/4

T2000WD/1

TD5X

MODELS:

Sound That Will Move You.

Summary of content (8 pages)

PAGE 1
TNT Series Amplifiers Owners Manual MODELS: T500W/2 T1000W/2 T2000W/4 T2000WD/1 TD5X Sound That Will Move You. Earthquake Sound reserves the right to amend details of the specifications without notice. Copyright © Earthquake Sound Corporation Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Tel 510-732-1000 Sound That Will Move You.
PAGE 2
TABLE OF CONTENTS SIGNAL SENSING FEATURE - AUTO ON/REMOTE ON Our Thank You................................................................................ Cautions and Advisories................................................................. Signal Sensing Feature.................................................................. Specifications................................................................................. Adjustments and Installation: T500W/2 (2-Channel Class A/B)......................
PAGE 3
SPECIFICATIONS Model T500W/2 T1000W/2 T2000W/4 T2000WD/1 TD5X Class A/B A/B A/B D D Number of Channels 2 2 4 1 Mono 4 Full Range + 1 Mono Max Power Output 800 Watts 1400 Watts 2000 Watts 2000 Watts 3000 Watts Max Power 4-Ohm Bridged 1 x 400 1 x 700 2 x 250 1 x 1000 @ 2Ω 2 x 100 @ 4Ω + 1 x 300 @ 4Ω Max Power 4-Ohm Stereo 2 x 150 2 x 300 4 x 100 1 x 600 @ 4Ω 4 x 100 @ 4Ω ^+ 1 x 600 @ 2Ω THD @ 4-Ohm THD @ 2-Ohm > 0.01% > 0.05% > 0.01% > 0.05% > 0.01% > 0.05% > 0.01% > 0.
PAGE 4
T500W/2 This information applies to both HPF and LPF HIGH LEVEL INPUT: Speaker level inputs with a range of 0.5V to 17V RMS. LEVEL ADJUST: Allows the amplifier to deliver a controlled maximum sound level into selected channel(s) when the volume is turned to max. This acts as a volume limiter for the system, preventing you from over driving the speakers or subwoofers.
PAGE 5
T1000W/2 This information applies to both HPF and LPF HIGH LEVEL INPUT: Speaker level inputs with a range of 0.5V to 17V RMS. LEVEL ADJUST: Allows the amplifier to deliver a controlled maximum sound level into selected channel(s) when the volume is turned to max. This acts as a volume limiter for the system, preventing you from over driving the speakers or subwoofers.
PAGE 6
T2000W/4 This information applies to both channels 1/2 and 3/4 HIGH LEVEL INPUT: Speaker level inputs with a range of 0.5V to 17V RMS. LEVEL ADJUST: Allows the amplifier to deliver a controlled maximum sound level into selected channel(s) when the volume is turned to max. This acts as a volume limiter for the system, preventing you from over driving the speakers or subwoofers.
PAGE 7
T2000WD/1 HIGH LEVEL INPUT: Speaker level inputs with a range of 0.5V to 17V RMS. LOW LEVEL INPUTS: Low level inputs with a range of 0.2V to 7V RMS. This is where the front and rear RCA outputs from your head unit or other devices are inserted. SUBSONIC FILTER: For the vast majority of vehicles, peaks or dips occur at about 40Hz – around the frequency of a low bass guitar note. Use this control to correct that peak or dip.
PAGE 8
TD5X CH1/2 This information applies to both channels 1/2 and 3/4 SUB INPUT: This is your subwoofer channel where the sub RCA outputs from your head unit are inserted. SUB XOVER: The 0-18dB/Oct Xover provides control over the device cutoff frequency. MODE SELECTOR: This feature tells the amplifier to run in either HIGH PASS, FULL RANGE or LOW PASS MODE SUBWOOFER CONTROL L GAIN XOVER CHANNEL 1/2 CONTROL MODE REMOTE VARIABLE XOVER: C o n t r o l t h e corresponding channels' cutoff frequencies.