Warranty Guide

Operator's Manual
MC440 4-Cycle Cultivator
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
26
EARTHQUAKE™
A Division of Ardisam, Inc.
1160 Eighth Avenue; P.O. Box 666
Cumberland, Wisconsin 54829
800-345-6007 · Fax [phone]
E-mail: [e-mail]
MC440 4-CYCLE CULTIVATOR
Warranty Terms and Conditions
PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY
Ardisam, Inc., a manufacturing company, warrants this EARTHQUAKE 4-CYCLE CULTIVATOR to be free from
defects in the material or workmanship for a period of one year from the date of purchase. During the one-year
warranty of this product, Ardisam will furnish, at their discretion, parts and labor to correct any defect caused by
faulty material or workmanship. Any unit used in a commercial application is covered for a period of 90 days after
purchase. This warranty applies to the original owner with a proof of purchase and is not transferable. For the
warranty to be valid, the product must be registered online, or the warranty card must be lled out and received
by Ardisam, Inc., within 30 days of purchase.
ENGINE WARRANTY: 2-YEAR LIMITED EMISSIONS CONTROL WARRANTY
(SEE EXPLANATION OF EMISSIONS CONTROL WARRANTY PROVISIONS FOR DETAILS)
Ardisam, Inc., a manufacturing company warrants its Viper® Engines under a two-year limited emissions control
warranty to be free from defects in materials and workmanship for the service life of the product not to exceed
twenty-four consecutive months from the date of purchase for consumer applications.
*These warranties apply only to products which have not been subjected to negligent use, misuse, alteration, ac-
cident, unauthorized parts, failure to use proper fuel and oil, or if repairs have been performed at non-authorized
service centers. These warranties supersede all other warranties either expressed or implied and all other obligations
or liabilities on our part. Ardisam, does not assume, and does not authorize any other person to assume for us, any
liability in connection with the sale of our products. To be at "No Charge," warranty work must be sent directly
to Ardisam, Inc. or one of our authorized service centers and performed by them. To obtain warranty service
and/or replacement instructions, contact our customer service department. If you choose to ship your product
to Ardisam for warranty repair, you must rst have prior approval from Ardisam by calling our customer service
department for a return material authorization number (RMA#). Under these circumstances, all items must be
shipped prepaid. Ardisam will at no charge, repair or replace, at their discretion, any defective part which falls under
the conditions stated above. Ardisam retains the right to change models, specications and price without notice.