Product Manual

Operator Manual
Pioneer Dual Direction Rear Tine
Get parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST. 13
INSTALLING FORWARD/REVERSE BELTS
1. Place reverse belt around transmission pulley in reverse groove. SEE FIGURE 11
2. Place forward belt around engine pulley in forward groove between the wire
guides. SEE FIGURE 12
3. Gently rotate transmission pulley and force the forward belt into the forward
groove. SEE FIGURE 9
4. Slide reverse belt onto reverse arm idler pulley between wire guides and rest
against engine pulley reverse groove. SEE FIGURE 8
5. Tighten the reverse idler pulley with two 13mm wrenches so the wire guides
don’t touch the belt when the reverse drive lever is engaged.
6. Reconnect the forward and reverse cables
to the forward and reverse
drive control levers.
7. Reinstall upper shrouds,
lower pulley guards,
and wheels.
SEE FIGURE 7
NOTE: Do not attempt to
install wheels before
installing lower
pulley guard.
8. Attach
spark plug wire.
Figure 10
Figure 8
Figure 9
Figure 11
Figure 12
Wire
Guides
Wire
Guides
Figure 7