Use and Care Manual
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
8
Operator's Manual
Two-Man Earth Auger Powerhead 9800 Series
UNPACK POWERHEAD
1. Carefully lift the powerhead out of the box, remove any
packing material and cut any ties.
TOOLS REQUIRED
ASSEMBLY INSTRUCTIONS SEE FIGURE 1
1. Insert the output shaft of the transmission in the open end
of the Flex Coil Shock Top.
2. Line up the bolt holes through the Flex Coil Shock Top and
the output shaft of the transmission.
3. Place the included 3/8-16 x 1.5 inch bolt through the bolt hole.
4.
5. Using two 9/16 inch wrenches, securely tighten the nut and bolt.
ASSEMBLY
Figure 1
3/8-16 x 1.5 inch bolt
3/8-16 bi-way locknut
ex coil shock top
transmission output shaft