Operator’s Manual Original Operating Instructions Two-Man Earth Auger Powerhead 9800 Series SN Includes Model: CAUTION ICON R1 9800K Get parts online at www.GetEarthquake.com READ OM ICON R1 P/N: 22914 ECN: 11558 REV1: 03/10/17 © 2017 Ardisam, Inc.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series INTRODUCTION Thank you for purchasing an Earthquake™ 9800K Powerhead. We have worked to ensure that this powerhead meets the highest standards for usability and durability. With proper care, your powerhead will provide many years of service. Please read this entire manual before installation and use. Earthquake® reserves the right to change, alter or improve the product and this document at any time without prior notice.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series WARNINGS AND SAFETY PRECAUTIONS Owner’s Responsibility Accurate assembly and safe and effective use of the machine is the owner’s responsibility. • Read and follow all safety instructions. • Carefully follow all assembly instructions. • Maintain the machine according to directions and schedule included in this Earthquake operator’s manual. • Ensure that anyone who uses the machine is familiar with all controls and safety precautions.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series General Safety Rules • Read, understand, and follow all instructions on the machine and in the manual(s). Be thoroughly familiar with the controls and the proper use of the machine before starting. • Use this equipment for its intended purpose only. • Familiarize yourself with all of the safety and operating decals on this equipment and on any of its attachments or accessories. • Do not put hands or feet near or under rotating parts.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series DANGER CAUTION ENGINES GIVE OFF CARBON MONOXIDE, AN ODORLESS, COLORLESS, POISONOUS GAS. CARBON MONOXIDE MAY BE PRESENT EVEN IF YOU DO NOT SMELL OR SEE ANY ENGINE EXHAUST. BREATHING CARBON MONOXIDE CAN CAUSE NAUSEA, FAINTING OR DEATH, IN ADDITION TO DROWSINESS, DIZZINESS AND CONFUSION. HOT GASES ARE A NORMAL BY-PRODUCT OF A FUNCTIONING INTERNAL COMBUSTION ENGINE. FOLLOW ALL SAFETY INSTRUCTIONS TO PREVENT BURNS AND FIRES.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series • Carefully inspect the area to be drilled and remove all foreign objects. Do not drill above underground water lines, gas lines, electric cables, or pipes. Do not operate the earth auger powerhead in soil with large rocks and foreign objects which can damage the equipment. • • • OPERATION PRECAUTIONS • • • • • • • • • • • • • • This product is intended for use by two operators only.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series Service • Always stop the engine whenever you leave the equipment, before cleaning, repairing or inspecting the unit. Engine should be turned off and cool. Never make adjustments or repairs with the engine (motor) running. Flip the ON/OFF switch to the OFF position to prevent accidental starting. • Always wear eye protection when you make adjustments or repairs. • Keep all nuts and bolts tight and keep equipment in good condition.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series FEATURES STARTER PULL HANDLE FUEL CAP ON/OFF SWITCH OIL FILL CAP THROTTLE CONTROL SPARK PLUG AIR FILTER MUFFLER SPECIFICATIONS ENGINE TYPE/ DISPLACEMENT 4-cycle, 173cc FUEL TANK CAPACITY 0.25 gallon OIL TYPE 10W-30 FUEL TYPE Minimum 87 octane gasoline. NOTE: If using an ethanol blended fuel, a fuel stabilizer, mixed to manufacturer specifications, is recommended.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series UNPACKING AND ASSEMBLY OPERATION Unpack Powerhead Pre-Start Checklist 1. Carefully lift the powerhead out of the box and remove any packing material. Tools Required • Two (2) 9/16 inch wrenches • Two (2) 1/2 inch wrenches 2. Fill oil sump or check oil level. Check oil level often during engine break-in. 3. Fill fuel tank. Use unleaded, 87+ octane gasoline. Assembly (SEE FIGURE 1) 1.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series Filling Fuel Tank 1. Shut-off engine and allow engine to completely cool before refilling the fuel tank. 2. Move to a well ventilated area, outdoors, away from flames and sparks. 3. Clean debris from area around the fuel cap. 4. Loosen fuel cap slowly. Place the cap on a clean, dry surface. 5. Carefully add fuel without spilling. 6. Do not fill fuel tank completely full, allow space for fuel to expand. 7. Immediately replace fuel cap and tighten.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series Powerhead Maintenance WARNING 1. Keep all screws, nuts, and bolts tight. 2. For cold weather operation, store the unit in a cool environment. Transferring the unit from a cold to a warm place can cause the build up of harmful condensation. DO NOT ATTEMPT TO START ENGINE IN THE FOLLOWING WAYS: • DO NOT USE STARTING FLUID 3. If auger performance decreases, carefully inspect cutter edge of blade for any signs of wear.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series WARNING PRACTICE SAFETY AT ALL TIMES. ENGINE MUST BE TURNED OFF AND ALLOWED TO COOL, AND SPARK PLUG WIRE MUST BE DISCONNECTED BEFORE ATTEMPTING ANY MAINTENANCE OR REPAIR. TO PREVENT ACCIDENTAL STARTING: ENGINE MUST BE TURNED OFF AND COOL, AND SPARK PLUG WIRE MUST BE REMOVED FROM SPARK PLUG BEFORE CHECKING AND ADJUSTING ENGINE OR EQUIPMENT. TEMPERATURE OF MUFFLER AND NEARBY AREAS MAY EXCEED 150° F (65° C). AVOID THESE AREAS.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Engine will not start 1. Ignition switch off 1. Flip switch to ON position 2. Spark plug wire disconnected 2. Connect spark plug wire to spark plug 3. Out of fuel 3. Refuel 4. Spark plug wet, faulty or improperly gapped 4. Clean, replace or gap spark plug 5. Stale fuel 5. Drain old fuel and replace with fresh.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series ILLUSTRATED PARTS BREAKDOWN - Powerhead Assembly KEY # PART NO. DESCRIPTION 1 2 3 4 6 5 7,8 8 9 1 60G5NY 2* --- 3 4 QTY. NUT 5/16-18 NYLOCK 10 KOHLER XT775 VERTICAL ENGINE 1 67538 NUT 1/4-20 IN NYLOCK 4 22632 ADAPTER 9800 SERIES 1 5 22664 COVER ADAPTER CLUTCH ACCESS 1 6 WK6 KEY WOODRUFF 5/32 X 5/8 IN 1 7 715 SET SCREW 1/4-20 X 1/4 IN CUP POINT 1 8 9825 ASSEMBLY CLUTCH ROTOR 1 9 18106 BOLT M8 X 1.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series ILLUSTRATED PARTS BREAKDOWN - Transmission Assembly 1 2,4 17 3,4 4 17,18 4,5 6 7 4,8,13 9 10 7 9 11 KEY # PART NO. DESCRIPTION 12 5,13 7 3,13 GREASE 13 16 14 3,13 15 QTY.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series ILLUSTRATED PARTS BREAKDOWN - Auger Parts List EA2F, EA3F EA4F EA6F 23 20 23 2 4 3 10 21 8, 9 1 7 3,22 11 18 19 14 5 6 18 19 15 EA8F EA10F 5 2 4 3 EXT12 2 20 7 20 4 21 1 1 21 7 2 24 20 13 3,22 EXT18 12 2 18 20 17 19 18 16 19 5 16 25 5 Check for parts online at www.getearthquake.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series ILLUSTRATED PARTS BREAKDOWN - Auger Parts List KEY NO. PART NO. DESCRIPTION QTY.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series WARRANTY TERMS AND CONDITIONS Ardisam, Inc. (Ardisam) warrants this powerhead under a five-year limited warranty to be free from defects in the material or workmanship or both for a period not exceeding sixty consecutive months from the date of original purchase by the first retail consumer or first commercial end user. This warranty does not apply to the engine mounted on the product. Refer to engine manual for engine warranty details.
Operator’s Manual Two-Man Earth Auger Powerhead 9800 Series NOTES Check for parts online at www.getearthquake.
Earthquake®, Division of Ardisam, Inc. 1160 8th Avenue, PO Box 666 Cumberland, WI 54829 800-345-6007 | Fax 715-822-2223 E-mail: info@getearthquake.com All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Items used for props not included. Some assembly may be required. Check for parts online at www.getearthquake.