Operating instructions

6
• The unit must be shut off before attaching or
removing the bag. Shut the engine off, wait for all
moving parts to stop, remove and secure the spark
plug wire, then attach or remove the bag.
• Make certain that pieces of metal, rocks, bottles,
cans, or other foreign objects are not accidentally
included when feeding material into the chipper/
shredder.
TRANSPORTING AND STORAGE
• Always use the hopper handle and built-in wheels to
move the chipper/shredder. Never lift the unit using
the fuel tank for support. If the unit must be lifted ,
always use at least two people, and always grip the
unit securely using the front leg and hopper handle.
• If the unit must be tilted for transporting, consult the
engine manual for required preparation. Normally,
fuel and oil must be drained to prevent dangerous
fuel leakage, and unwanted transfer of the sump oil
into the cylinder head area.
• Always refill the engine with the recommended oil
before attempting to use the unit again after it has
been drained for transportation.
• Always observe safe refueling and fuel handling
practices when refueling the unit after transportation
or storage.
• Always follow the engine manual instructions for
storage preparations before storing the unit for
prolonged periods.
• Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
SERVICE AND MAINTENANCE
• Before performing any service or repair, shut the
engine off, wait for all moving parts to stop, then
disconnect and secure the spark plug wire.
• Always follow recommended engine and chipper/
shredder procedures when performing required
service and maintenance on the unit.
• Use only factory authorized replacement parts when
making repairs.
• Always comply with recommended factory
specifications on all settings and adjustments.
SAFETY RULES
• Only factory authorized service locations should
perform major service and repairs.
• Never attempt to make major repairs on this unit
unless you have been properly trained and certified
to work on large capacity chipper/shredder units.
Improper service procedures can result in hazardous
operation, equipment damage, and voiding of
manufacturer’s warranty.