Operator's Manual Original Operating Instructions Chainsaw CS3814, {S3816, €s54116 Ernie warning BEFORE USING OUR PRODUCTS, READ THIS MANUAL CAREFULLY TO UNDERSTAND THE PROPER USE OF YOUR UNIT. P/N: 838184 ECN: 9640 REV: 12/20/12 Get parts online at © 2013 Disarming, Inc. www.getearthquake.
Operator's Manual £53814, £53816, 54116 Chainsaws INTRODUCTION THANK YOU. for purchasing a chainsaw from Earthquake”. We have worked to ensure that this chainsaw meets high standards for usability and durability. With proper care, your chainsaw will provide many years of service. Take the time to read this manual carefully to learn how to correctly operate and maintain your chainsaw.
Operator's Manual £53814, £53816, 54116 Chainsaws WARNINGS AND SAFETY PRECAUTIONS OPERATOR'S RESPONSIBILITY Accurate assembly and safe and effective use of the machine is the operator's responsibility. Read! and follow all safety instructions. Carefully follow all assembly instructions. Maintain the machine according to directions and schedule included in this operator's manual, Ensure that anyone who uses the machine is familiar with all controls and safety precautions.
Operator's Manual £53814, £53816, 54116 Chainsaws GENERAL SAFETY RULES Read, understand, and follow alt instructions on the machine and in the manual(s). Be thoroughly familiar with the controls and the proper use of the machine before starting. Use this equipment for its intended purpose only. Familiarize yourself with all of the safety and operating decals on this equipment and on any of its attachments or accessories. Do not put hands or feet near or under rotating parts.
Operator's Manual £53814, £53816, 54116 Chainsaws Always hold the chainsaw firmly with both hands when the engine is running. Use a firm grip with thumb and fingers encircling the chainsaw handles. «When carrying from one place to another, always stop the engine and hold the saw with the guide bar and saw chain behind you and the muffler away from your body. + Inspectorate chainsaw for worm, loose, or damaged parts.
Operator's Manual £53814, £53816, 54116 Chainsaws Felling Notch cf The felling notch is the first cut when felling a direction ree The notch will act as a hinge and will direct offal the tree to fall in the desired direction. hem Begin the felling notch by lining up the guide bar perpendicular to the desired felling direction. I= Make a downward cut at 45-egress to a depth of about the overall diameter of the tree.
Operator's Manual £53814, £53816, 54116 Chainsaws ENGINE SAFETY PRECAUTIONS Warning Carbon Monoxide Poisoning Engines give off carbon monoxide, an odorless, colorless, poisonous gas, Carbon monoxide may be present even ff you do not smell or see any engine exhaust. Breathing carbon monoxide tan cause nausea, fainting or death, in addition to drowsiness, dizziness and confusion. If you experience any of these symptoms, seek fresh air and medical attention immediately.
Operator's Manual £53814, £53816, 54116 Chainsaws Never pour fuel from engine fuel tank. Never siphon fuel by mouth to drain fuel tank.
Operator's Manilas C53814, CS3816, C54116 Chainsaws re SAFETY DECALS Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the chainsaw to remind you of this important information while you are operating the unit.
Operator's Manilas C53814, CS3816, C54116 Chainsaws C ¢ CE MODEL SAFETY WARNINGS AND MARKINGS (FOR EUROPEAN MODELS) The following markings and labels are applied to the product, in addition to those shown in the original instructions.
Operator's Manual £53814, £53816, 54116 Chainsaws SAFETY FEATURES 2. Th rattle Interlock: This saw is equipped with a throttle interlock designed to prevent accidental engagement of the throttle control. The throttle interlock is disengaged by depressing the red tab on top of the rear handle, This is usually accomplished when the user grasps the rear handle to operate the saw.
Operator's Manual £53814, £53816, 54116 Chainsaws FEATURES 1. Front hand guard and 6. Rear handle 12. Saw chain chain brake 7. Throttle trigger 13. Guide bar 2. Starter handle 8. Engine switch 14. Prime Bulb 3. Air filter cover 6. Oil tank cap 4. Choke knob 10. Fuel tank cap 5. Throttle trigger lock-out 11. Front handle 12 Check for parts online at www.getearthguake.
Operator's Manual £53814, £53816, 54116 Chainsaws SPECIFICATIONS SPECIFICATIONS Displacement 37.2cc {CS3814/CS3816) 40.
Operator's Manual £53814, £53816, 54116 Chainsaws ASSEMBLY The Earthquake® chainsaw carton includes the following Power Unit: Pr-assembled engine, handles, fuel tank, oil tank, and chain brake handle. {aide Bar: Oregon Double Guard 147or 167 depending on the saw model. ~ Saw Chain: Oregon 91P or $1VG $52 (147 models) or Oregon $57 (16 models) “Se wrench” Multi-tool Combination plug/bar wrench and screwdriver Bar Scabbard: Plastic guard that fits over the guide bar and saw chain.
Operator's Manual £53814, £53816, 54116 Chainsaws OPERATION A warning FILLING FUEL TANK . | CHAIN BRAKE WILL NOT PREVENT A KICKBACK. IN THE 1. Shut off engine and allow engine to completely cool before EVENT OF A KICKBACK, THE CHAIN BRAKE IS DESIGNED refilling the fuel tank. TO REDUCE THE RISK OF INJURY TO THE OPERATOR. 2. Move to a well-ventilated area, outdoors, away from flames and sparks.
Operator's Manual £53814, £53816, 54116 Chainsaws PER-START INSPECTION 1. Check that all safety guards are in place and all nuts and bolts are secure. 2. Inspect air cleaner for cleanliness, 3. Check the fuel supply. Fill the fuel tank no closer than 5"from top of tank to provide space for expansion. 4. Check the bar and chain oil level. 5. Be sure spark plug wire is attached and spark plug is tightened securely. 6. Examine underneath and around engine for signs of oi or fuel leaks. 7.
Operator's Manual £53814, £53816, 54116 Chainsaws MAINTENANCE AND STORAGE Good maintenance is essential for safe, economical, and trouble-free operation. It will also help reduce air pollution. To help you properly care for your engine, the following pages include simple maintenance procedures using basic hand tools. Other service tasks that are more difficult, or require special tools, are best handled by professionals and are normally performed by a technician or other qualified mechanic.
Operator's Manual £53814, £53816, 54116 Chainsaws BAR AND CHAIN OIL The saw is equipped with an adjustable chain oilier. The oil pump, driven by the drive sprocket, will only pump oil when the engine Is running at high enough speeds to engage the clutch and rotate the chain. Furthermore, the flow of oils adjustable to accommodate variations in chain off due to temperature, To adjust the oil pump, insert a screwdriver in the small notch beneath the clutch and drive sprocket.
Operator's Manual £53814, £53816, 54116 Chainsaws Installing Spark Plug 1. Reinstall original spark plug, tighten additional 1/2 tum. ~ , Installing new spark plug, adjust spark plug gap to 0257 {0,635mm} and tighten additional 1/8 1/4 tum. NOTE: Loose spark plug may overheat and damage engine. Ever tightened spark plug may damage threads in the cylinder head.
Operator's Manual £53814, £53816, 54116 Chainsaws 8. File ONLY on the “Push” stroke, do not pull the file against any metal object as this will damage the file. It is also important to maintain the depth gauge setting throughout the lifespan of the saw chain. 81VG and 91P chains use a depth setting of 025" This setting should be checked and corrected every third or fourth time the saw chain is sharpened.
Operator's Manual £53814, £53816, 54116 Chainsaws TROUBLESHOOTING AND REPAIR TROUBLESHOOTING GUIDE While normal care and routine maintenance will extend the life of your chainsaw, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly. The troubleshooting guide below lists the most common problems, causes and remedies.
Operator's Manual £53814, £53816, 54116 Chainsaws arr CHAINSAW PARTS BREAKDOWN FIGURE 1 FIGURE 2 JS 1.24 22 Check for parts online at www.getearthguake.
Operator's Manual €53814, €53816, (54116 Chainsaws I FIGURE 3 FIGURE E Check for parts online at www.getearthquake.
Operator's Manual £53814, £53816, 54116 Chainsaws arr FIGURE 5 FIGURES 24 Checked for parts online at www.gatearthguake.
pe Tra Operator's Manual £53814, £53816, 54116 Chainsaws FIGURE 7 12,18 FIGURE 8 teal 1s = 12,15 re 12,13 12,15 12,1530 Check for parts online at www.getearthquake.
Operator's Manual £53814, £53816, 54116 Chainsaws PARTS BREAKDOWN CHAINSAW PARTS LIST HEV (PART DESCRIPTION : DIY.
Operator's Manual £53814, £53816, 54116 Chainsaws EARTHQUAKE® CHAINSAWS 1-YEAR LIMITED WARRANTY Terms and Conditions PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY Disarming, Inc, a manufacturing company, warrants this EARTHQUAKE® CHAINSAW to be free from defects in the material or workmanship for a period of ane year from the date of purchase.
Earthquake Operator's Manual £53814, £53816, 54116 Chainsaws Explanation of Emissions Control Warranty Provisions Viper Engines are designed, built and equipped to meet all EPA requirements. ft warrants that iris free from defects In material and workmanship that could cassette failure to the warranted part; and that It is identical in all material respects to the engine described in the manufacturer's application for certification.
Operator's Manual £53814, £53816, 54116 Chainsaws 30 Check for parts online at www.getearthguake.
Operator's Manual £53814, £53816, 54116 Chainsaws pms NOTES Check for parts online at www.getearthquake.
Earthquake®, Division of Ar disarm, Inc. 1160 8th Avenue, PO Box 666 Cumberland, Wl 54829 800-345-6007 | Fax 715-822-2223 E-mail: Ultralights spice meets, product soon features sce appropriated and are subject 10 change wou notice, Du Fay not bi exact, Rams fia Re pops not included. Som tenuous product Improve seasonably spay be china, Check for parts online at www.getearthguake.