Ernie Operator's Manual Original Operating Instructions Chainsaw CS4518 Get parts online at www.getearthquake.com A warning BEFORE USING OUR PRODUCTS, READ THIS MANUAL CAREFULLY TO UNDERSTAND THE PROPER USE OF YOUR UNIT. PIN: 142148 Rev. 12/05/12 © 2013 Disarming, Inc.
Operator's Manual €S4518 Chainsaws INTRODUCTION THANK YOU. for purchasing a chainsaw from Earthquake”. We have worked to ensure that this chainsaw meets high standards for usability and durability. With proper care, your chainsaw will provide many years of service. Take the time to read this manual carefully to learn how to correctly operate and maintain your chainsaw.
Operator's Manual €S4518 Chainsaws WARNINGS AND SAFETY PRECAUTIONS OPERATOR'S RESPONSIBILITY Accurate assembly and safe and effective use of the machine is the operator's responsibility. Read! and follow all safety instructions. Carefully follow all assembly instructions. Maintain the machine according to directions and schedule included in this operator's manual, Ensure that anyone who uses the machine is familiar with all controls and safety precautions.
Operator's Manual €S4518 Chainsaws GENERAL SAFETY RULES Read, understand, and follow alt instructions on the machine and in the manual(s). Be thoroughly familiar with the controls and the proper use of the machine before starting. Use this equipment for its intended purpose only. Familiarize yourself with all of the safety and operating decals on this equipment and on any of its attachments or accessories. Do not put hands or feet near or under rotating parts.
Operator's Manual €S4518 Chainsaws Always hold the chainsaw firmly with both hands when the engine is running. Use a firm grip with thumb and fingers encircling the chainsaw handles. «When carrying from one place to another, always stop the engine and hold the saw with the guide bar and saw chain behind you and the muffler away from your body. + Inspectorate chainsaw for worm, loose, or damaged parts.
Operator's Manual €S4518 Chainsaws Felling Notch cf The felling notch is the first cut when felling a direction ree The notch will act as a hinge and will direct offal the tree to fall in the desired direction. hem Begin the felling notch by lining up the guide bar perpendicular to the desired felling direction. I= Make a downward cut at 45-egress to a depth of about the overall diameter of the tree. k=] Finish the notch by making a horizontal cut perpendicular to the desired felling direction.
Operator's Manual €S4518 Chainsaws ENGINE SAFETY PRECAUTIONS Warning Carbon Monoxide Poisoning Engines give off carbon monoxide, an odorless, colorless, poisonous gas, Carbon monoxide may be present even ff you do not smell or see any engine exhaust. Breathing carbon monoxide tan cause nausea, fainting or death, in addition to drowsiness, dizziness and confusion. If you experience any of these symptoms, seek fresh air and medical attention immediately.
Operator's Manual €S4518 Chainsaws Never pour fuel from engine fuel tank. Never siphon fuel by mouth to drain fuel tank.
Operator's Manilas £54518 Chainsaws re SAFETY DECALS Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the chainsaw to remind you of this important information while you are operating the unit.
Operator's Manilas £54518 Chainsaws C ¢ CE MODEL SAFETY WARNINGS AND MARKINGS (FOR EUROPEAN MODELS) The following markings and labels are applied to the product, in addition to those shown in the original instructions.
Operator's Manual €S4518 Chainsaws SAFETY FEATURES 2. Th rattle Interlock: This saw is equipped with a throttle interlock designed to prevent accidental engagement of the throttle control. The throttle interlock is disengaged by depressing the red tab on top of the rear handle, This is usually accomplished when the user grasps the rear handle to operate the saw.
Operator's Manual €S4518 Chainsaws FEATURES 1. Front hand guard and brake 7. Throttle trigger 13. Guide bar 2. Starter handle 8. Engine switch 14. Primer Bulb 3. Air filter cover 9. Fuel tank cap 4. Choke knob 10. Oil tank cap 5. Throttle trigger lock-out 11. Front handle 6. Rear handle 12. Saw chain 12 Check for parts online at www.getearthguake.
Operator's Manual €S4518 Chainsaws SPECIFICATIONS SPECIFICATIONS | Displacement 45,02¢c Fuel Mixture {Unleaded Gasoline, 50: two-cycle oil 1) Fuel tank capacity 550 ml Chain oil Bar chain oil for proper season Oil tank capacity 260 mi Carburetor Diaphragm type Fuel consumption at maximum engine power | 560 kWh idling speed 3000 ypm max / rpm 200 Maximum speed with cutting attachment 11,500 r/min 500 ignition system CO with timing advance function Spark Plug Champion FILBERT or equivalent Oit feeding system
Operator's Manual €S4518 Chainsaws ASSEMBLY The Earthquake® chainsaw carton includes the following Power Unit: Pr-assembled engine, handles, fuel tank, oil tank, and chain brake handle. {aide Bar: Oregon Double Guard 147or 167 depending on the saw model. ~ Saw Chain: Oregon 91P or $1VG $52 (147 models) or Oregon $57 (16 models) “Se wrench” Multi-tool Combination plug/bar wrench and screwdriver Bar Scabbard: Plastic guard that fits over the guide bar and saw chain.
Operator's Manual €S4518 Chainsaws OPERATION FILLING FUEL TANK 1. Shut off engine and allow engine to completely cool before refilling the fuel tank. 2. Move to a well-ventilated area, outdoors, away from flames and sparks. 3, Clean debris from area around the fuel cap. 4, Loosen fuel cap slowly. 5. Carefully add fuel without spilling. 6. Do not fill gas tank completely full; allow space for fuel to expand. 7.
Operator's Manual €S4518 Chainsaws PER-START INSPECTION 1. Check that all safety guards are in place and all nuts and bolts are secure. 2. Inspect air cleaner for cleanliness, 3. Check the fuel supply. Fill the fuel tank no closer than 5"from top of tank to provide space for expansion. 4. Check the bar and chain oil level. 5. Be sure spark plug wire is attached and spark plug is tightened securely. 6. Examine underneath and around engine for signs of oi or fuel leaks. 7.
Operator's Manual €S4518 Chainsaws MAINTENANCE AND STORAGE Good maintenance is essential for safe, economical, and trouble-free operation. It will also help reduce air pollution. To help you properly care for your engine, the following pages include simple maintenance procedures using basic hand tools. Other service tasks that are more difficult, or require special tools, are best handled by professionals and are normally performed by a technician or other qualified mechanic.
Operator's Manual €S4518 Chainsaws BAR AND CHAIN OIL The saw is equipped with an adjustable chain oilier. The oil pump, driven by the drive sprocket, will only pump oil when the engine Is running at high enough speeds to engage the clutch and rotate the chain. Furthermore, the flow of oils adjustable to accommodate variations in chain off due to temperature, To adjust the oil pump, insert a screwdriver in the small notch beneath the clutch and drive sprocket.
Operator's Manual €S4518 Chainsaws 1. Reinstall original spark plug, tighten additional 1/2 tum. 2. installing new spark plug, adjust spark plug gap to 025" {0,635mm} and tighten additional 1/8 1/4 turn, NOTE: Loose spark plug may overheat and damage engine. Ever tightened spark plug may damage threads in the cylinder head. CARBURETOR Never tamper with the factory setting of the carburetor.
Operator's Manual €S4518 Chainsaws metal object as this will damage the file, It is also important to maintain the depth gauge settling throughout the lifespan of the saw chain, 91VG and 917 chains use a depth setting of 025" This setting should be checked and corrected Avery third or fourth time the saw chain is sharpened. 1.
Operator's Manual €S4518 Chainsaws TROUBLESHOOTING AND REPAIR TROUBLESHOOTING GUIDE While normal care and routine maintenance will extend the life of your chainsaw, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly. The troubleshooting guide below lists the most common problems, causes and remedies.
Operator's Manual €S4518 Chainsaws arr CHAINSAW PARTS BREAKDOWN ° FIGURE 1 FIGURE 2 22 Check for parts online at www.getearthguake.
pe Tra Operator's Manual €S4518 Chainsaws FIGURE 3 2 FIGURE 4 Check for parts online at www.getearthquake.
Operator's Manual €S4518 Chainsaws arr FIGURE 5 FIGURE 6 24 Checked for parts online at www.gatearthguake.
Operator's Manual €S4518 Chainsaws Tra FIGURE 7 FIGURE 8 Check for parts online at www.getearthquake.
Operator's Manual €S4518 Chainsaws PARTS BREAKDOWN CHAINSAW PARTS LIST HEV (PART # 1 DESCRIPTION Cin 1 14203 KIT BUCKING SPIKE 1 2 13507 ASSEMBLY CLUTCH COVER 1 3 14204 KIT £54518 ACCESSORY PACK 1 4 SHORT BLOCK 45CC CHAINSAW W/CHASSIS 1 5 14206 KIT MUFFLER COMPLETE 1 6 14231 KIT VIBRATION DAMPENING COMPLETE 1 7 14232 KIT FLYWHEEL REPLACEMENT 1 8 14233 KIT COMPLETE ELECTRICAL 1 9 13541 KIT TRIGGER ASSEMBLY 1 10 845117 AIR FILTER 1 11 13539 KIT CARBURETOR REPLACEMENT 1 12 13538 KIT PUMP ADJUSTABLE OIL 1 13 13
Operator's Manual €S4518 Chainsaws ne EC DECLARATION C & OF CONFORMITY ame and Address of the manufacturer: Disarming Manufacturing Inc. 1690 Eim Street, Cumberland, WHILST 54829 Name and Address of person authorized Wh. C. indie, Sadism Europe, 3 Apple yard Close, Winston, Manchester. M27 SAZ United Kingdom to rampart the technicians! file: Description of Equipment: Chain Saw Widget / Type: C338, 0541, TEAS Serial No.
Operator's Manual €S4518 Chainsaws EARTHQUAKE® CHAINSAWS 1-YEAR LIMITED WARRANTY Terms and Conditions PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY Disarming, Inc, a manufacturing company, warrants this EARTHQUAKE” CHAINSAW to be free from defects in the material or workmanship for a period of one year from the date of purchase. During the one-year warranty of this product, Disarming will furnish, at their discretion, parts and labor to correct any defect caused by fatuity material or workmanship.
Earthquake Operator's Manual €S4518 Chainsaws Explanation of Emissions Control Warranty Provisions Viper Engines are designed, built and equipped to meet all EPA requirements. ft warrants that iris free from defects In material and workmanship that could cassette failure to the warranted part; and that It is identical in all material respects to the engine described in the manufacturer's application for certification.
Operator's Manual €S4518 Chainsaws 30 Check for parts online at www.getearthguake.
Operator's Manual €S4518 Chainsaws Check for parts online at www.getearthquake.
Earthquake®, Division of Ar disarm, Inc. 1160 8th Avenue, PO Box 666 Cumberland, Wl 54829 800-345-6007 | Fax 715-822-2223 E-mail: Ultralights spice meets, product soon features sce appropriated and are subject 10 change wou notice, Du Fay not bi exact, Rams fia Re pops not included. Som tenuous product Improve seasonably spay be china, Check for parts online at www.getearthguake.