Manual

Specifications
Specifications
www.earthquakesound.com
Specifications are subject to change without notice
6 7
E W S 6 0 0 S P E C I F I C AT I O N S
Frequency Response:
Sensitivity:
Nominal Impedance:
Power Handling:
Enclosure Material / Type:
Driver Components:
40Hz - 20kHz
87dB @ 1W/1M
8-Ohm
350 Watts Max
Impact resist ABS Plastic
Grille Finish: White / Paintable
Mounting Depth: 3 9/16” (90mm)
Cut Out Dimension:
7 7/16” (188mm) x 10 7/8” (275mm)
Outer Dimension:
8 9/16” (217mm) x 11 15/16” (303mm)
Two-way system using:
one 6.5” low mass stiff kevlar
cone midbass and one 1” silk
dome swiveling NEO tweeter
Wire Gauge Recommended:
12
Weight Per Speaker:
3.5 lbs
3 9/16” (90mm)
7 7/16” (188mm) x 10 7/8” (275mm)
11 15/16” (303mm) x 8 9/16” (217mm)
E W S 8 0 0 S P E C I F I C AT I O N S
Frequency Response:
Sensitivity:
Nominal Impedance:
Power Handling:
Enclosure Material / Type:
Driver Components:
30Hz - 20kHz
88dB @ 1W/1M
8-Ohm
500 Watts Max
Impact resist ABS plastic
Two-way system using:
one 8” low mass stiff kevlar
cone midbass and one 1” silk
dome swiveling NEO tweeter
Grille Finish: White / Paintable
Wire Gauge Recommended:
Weight Per Speaker:
12
4.2 lbs
Mounting Depth:
4 1/16” (103mm)
Outer Dimension:
Cut Out Dimension:
8 13/16” (224mm) x 12 7/8” (326mm)
9 3/4” (248mm) x 13 3/4” (349mm)
4 1/16” (103mm)
8 13/16” (224mm) x 12 7/8” (326mm)
9 3/4” (248mm) x 13 3/4” (349mm)