DIMENSIONS AND SPECIFICATIONS Mini Me DSP P8 10.43" (265mm) 11.41" (290mm) 11" (278mm) DIMENSIONS INCLUDE FEET, GRILLE, AND AMPLIFIER ENCLOSURE TYPE Sealed Enclosure With Passive Radiator AMPLIFIER POWER 600 Watts MAX DRIVERS 8" Premium Extended Excursion Active Driver 8" Mass Tuned SLAPS-M Passive Radiator FREQUENCY RESPONSE ~~ 25Hz-160Hz (CROSSOVER FREQUENCY ~~ 40Hz-160Hz SIGNAL SENSING AUTO/ON/OFF INPUTS/OUTPUTS Low Level RCA Input.
WHAT MAKES A Mini Me DSP Digital Class “0” Amplifier ‘The kike DSP amplifier utilizes an advanced class “D" circuitry with over 90% efficiency, allowing it to perform continuously without getting hot.
ROOM TUNING WITH iWoofer™ Main Menu Cont'd ai wiki HE Bak Wagner fn Soi Sad House Rom Connection options . Gain 0.000 input Love @ ass ane, Over Control ‘The X Over or Crossover control allows the user to control both the Low Pass and High Pass filters by double tapping the curve, or pressing and holding it for more than { second. The curve can then be slid left to right to control the frequency from 20Hz up to 500Hz.
AMPLIFIER PLATE OVERVIEW (9) Power & Signal LED This LED indicator reflects the main power status of the amplifier as well as the state of the Mini Me DSP 8 amplifier {whether the AUTO Sensing is on/off and whether signal is being fed to the amplifier). Note that this LED will only illuminate when the main power switch is set to the ON position. (10) DSP LED This LED indicator reflects the status of the onboard DSP. When the DSP switch is set to the ON position the blue LED indicator will illuminate.
Low Level Mono DSP Setup Dual Sub woofers The diagram below illustrates how to connect a Mini Me DSP 8 sub woofer to an additional sub woofer using the MONO DSP output. Note that in order for the second sub woofer to receive the room corrected signal you must have the DSP switch set to the ON position. A non DSP sub woofer can also be used in this setup.
PLACING YOUR SUBPROFESSIONAL) Dual Sub Setup With Mono Signal ‘This is a BETTER setup. In a dual sub woofer setup, the sub-harmonic frequencies (black arrow) always move towards the middle of the room while the lows, dims, and highs follow the action (gray arrow}. Notice the breakaway and image separation is less in this setup than the single sub woofer setup. CONNECTING THE MINIM DSP Low Level RCA Setup Single Sub woofer This is the best way to drive an audio signal to your Mini Me DSP 8 sub woofer.