Instruction manual

3 - 38
3.5.6.3 Tilt and Z axes limitation
The allowable tilting angle depends on both Z axis position and specimen size. Figure of
relationship between allowable tilting angle for various Z position is shown below. If the specimen
height is set at higher than the standard setting, add the difference to Z and use the figure.
0
10
20
30
40
50
60
70
0 5 10 15 20 25 30
Z (mm)
T (deg)
φ25mm
φ15mm
φ50mm
φ75mm
φ100mm
φ125mm
φ150mm
-6
-5
-4
-3
-2
-1
0
1.522.533.544.555.566.577.588.599.510
Z (mm)
T (deg)
for all specimen size