Instruction manual

3-85
(c) Capturing images
The small indicators below the Capture button shows which screen is to be captured.
You can change the indication by clicking the indicators. Green color indicates
corresponding screen will be captured by the Capture button. When both indicators are
set green, both A and B screen are captured simultaneously.
(d) Image source for recording
The Record A/B selection buttons select which screen is to be recorded by direct or
memory photographing, direct saving, coping to clipboard or transferring to PCI.
(e) Capture resolution
The capture resolution 2560×1920 and 5120x3840 are not available.
(f) ABCC and BC monitor mode and knobs on the manual operation panel
ABCC and BC monitor mode and Brightness, Contrast knobs on the manual operation
panel are applied to the signal selected with the Signal A/B selection buttons.
3.9.2 Split Screen and Dual Mag Mode
Split Screen mode displays two images in the viewing area, and allows images to displays having
different signals and at different magnifications. This mode is available in Full and Small screen
modes.
To start Split Screen mode, select Split DM Mode command in the Scan menu.