Instruction manual

3-94
3.9.7 Pseudo Color Display
Use function of SEM Data Manager for pseudo Color imaging.
3.9.8 Data Entry Function
Use the DATA ENTRY block on the Operation panel for drawing graphics and texts on the
scanning image display. For saved image, use the same function provided in the SEM Data
Manager.
(1) function of tool buttons
(a)
Stop data entry
Stops data entry. Tool buttons are disabled.
Drawn data remains on image.
(b)
Edit text
Edit already written texts .
Selecting the Edit button changes mouse pointer to
mark. Click the text to be
edited. The text is changed to black background form. You can edit the text. The Enter
key terminates editing. The text is shown in red color and you can move its position
dragging it with mouse.
(c)
Text input
Write texts on the image.
After selecting the button, click on the image. The text input area of black stripe is shown
on the image. Input text using key board and terminate with Enter key. The text is shown
in red color and you can move its position dragging it with mouse.
If you enter a text in the text box and then, click on the image, the text is placed
automatically. 10 recently used texts are memorized and can be selected with the ↓
button. Use the function when you repeat to write same or similar texts.
To set the font and size, use DATA ENTRY / MEASUREMENT block in the Optional
Setup dialog window – General tab.