Instruction manual

3-123
(1) Function of tool buttons
Function of tool buttons in the Data Entry toolbox is similar to the function on S-4800.
(a)
Edit text
Edit already written texts .
Selecting the Edit button changes mouse pointer to
mark. Click the text to be
edited. The text is changed to black background form. You can edit the text. The Enter
key terminates editing. The text is shown in red color and you can move its position
dragging it with mouse.
(b)
Text input
Write texts on the image.
After selecting the button, click on the image. The text input area of black stripe is shown
on the image. Input text using key board and terminate with Enter key. The text is shown
in red color and you can move its position dragging it with mouse.
If you enter a text in the text box and then, click on the image, the text is placed
automatically. 10 recently used texts are memorized and can be selected with the ↓
button. Use the function when you repeat to write same or similar texts.
To set the font and size, use DATA ENTRY / MEASUREMENT block in the Optional
Setup dialog window – General tab.
(c)
Line
Draw lines on the image. Click this button, and press the left button of the mouse to
create the starting point of the line on the image. Move the mouse to an end point and
then release the button of the mouse. While this button is depressed, you can repeat a
line drawing.
(d)
Arrow
Draw single-head arrow marks on the image.
(e)
Double head arrow
Draw double-head arrow marks on the image.
(f)
Inner dimension mark
Draw inner dimension arrow marks on the image.
(g)
Outer dimension mark
Draw outer dimension marks on the image.
(h)
Inner dimension mark with measurement
Draw inner dimension marks with measurement on the image.
(i)
Outer dimension mark with measurement
Draw outer dimension marks with measurement on the image.
(j)
Circle
Draw circles or oval shapes on the image. Click this button and press the left button of
the mouse to create a starting point on the image. Draw a shape by moving the mouse