Instruction manual

2 - 5
Fig. 2-5 shows the appearance of large specimen stage driven by motors (type II).
Fig. 2-5 Large Specimen Stage (type II)
Range of movement in X direction : 0 to 110 mm
Range of movement in Y direction : 0 to 110 mm
Range of movement in Z direction : WD = 1.5 to 40 mm
(X-ray analysis position is at 15 mm working distance)
Range of movement in R direction : 360° continuously
Range of movement in T direction : -5° to 70°
Fine opening control X knob
Opening selector
Fine opening control Y knob
Absorbed current measuring
terminal
(normally used for specimen
bias voltage terminal)