Instruction manual

2 - 16
2.3 Graphical User Interface (GUI)
2.3.1 Starting the PC and logging in the S-4800 program
Use the following steps to log on to Windows 2000.
(1) Starting up the PC
Turn the DISPLAY power switch on. For some models of the PC, the power switch of the
PC shall be turned on.
(2) Log on
A message requesting key in will appear. Press Ctrl, Alt and Delete key simultaneously.
Then the logon dialog window will appear. Enter login name and password.
Use login name “S-4800” to operate S-4800. Initially no password is set for it.
The user may set or change password (refer to the manual of Windows 2000).
NOTICE Initially following users are set when sipped.
Administrator : Administrator level, no password
S-4800 : Power user level, no password
(“S-4800” is set to Power User level. It is because, different from NT, the Windows 2000
does not allow changing registry to User level)
For operation of Windows, refer to instruction manual for Windows 2000
(R)
.
S-4800 control program will start up automatically. When starting S-4800 control program after
once terminate it, select Start – PC_SEM on the taskbar. If the shortcut to it has been created,
double-clicking the PC-SEM
icon will start the S-4800 control program.
Fig. 2-14 example of Windows desktop
( Windows 2000
(R)
is trade mark of Microsoft corp.)
PC-SEM icon