Instruction manual

2 - 23
(5) Scan menu: The Scan menu includes commands for scanning control.
• Run (Freeze) Runs or Freezes scanning alternately.
• Capture Starts image capturing.
Refer to <3.6.4 Image Capturing>
• Capture Reso Selects capturing image resolution
• Split DM Mode Activates Split/Dual Mag mode.
Refer to <3.9.2 Split screen and Dual Mag mode>
• Scan Speed Selects scanning speed.
Refer to <3.5.3 Selecting Scanning Speed>
• Arrange Speed buttons Specifies scanning speed of each of 4 Scanning Speed buttons.
Refer to <3.5.3 Selecting Scanning Speed>
• Scan Size Selects the size of scanning image display (Screen mode) from
Full, Dual and Small.
Refer to ,3.9.1 Screen mode>
(6) Image menu: The Image menu includes commands for signal processing of optional
detectors.
• Opt. Signal Processing Opens the Opt Signal Processing dialog window.
Refer to <3.9.5 Signal Processing>
(7) Analysis menu: The Analysis menu includes commands for analysis modes, measurement
and others.
• Normal Sets to Normal mode (image observation).
• Line Analysis Selects Line analysis 1 and 2 mode alternately.
Refer to <3.9.4 X-ray Analysis mode>
• Spot Analysis Selects Spot 1 and 2 mode alternately.
Refer to <3.9.4 X-ray Analysis mode>
• Area Analysis Selects Area analysis 1 and 2 mode alternately.
Refer to <3.9.4 X-ray Analysis mode>
• Oblique Opens Oblique image window and displays birds-eye view of
viewing images.
Refer to <3.9.14 Oblique Image>
• Measure If the CD-Measurement option is installed, the CD Measurement
dialog window is brought up. If the option is not installed,
measurement cursors appear on the image.