eBuddy 6.
ENGLISH Table of Contents CHAPTER 1 GETTING STARTED 1 Getting Started ................................................................................... 2 Inventory ............................................................................................. 3 Safety and Maintenance .................................................................... 4 Checklists ........................................................................................... 5 Features .........................................
iii ENGLISH CHAPTER 3 MAKING CONNECTIONS 35 Making Connections ........................................................................ 36 Left Side Connectors ....................................................................... 36 Right Side Connectors .................................................................... 37 Front Side Connectors .................................................................... 38 CHAPTER 4 SYSTEM SOFTWARE 39 System Software ..........................................
ENGLISH UL CAUTION ..................................................................................... 70 Canadian Department of Communications ................................... 72 Battery Disposal............................................................................... 73 CAUTION FOR ADAPTER................................................................ 73 BATTERY CAUTION......................................................................... 73 CLASS 1 LASER PRODUCT ..........................
ENGLISH Chapter 1 Introduction
ENGLISH Chapter 1 — Introduction Getting Started Congratulations on your purchase of the Notebook computer! Your new notebook features the most innovative advances in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use.
Introduction — Inventory This computer system is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your notebook during the warranty period. Update this section when you add new options.
ENGLISH Chapter 1 — Introduction Safety and Maintenance You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: • Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Introduction — Checklists Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration. Checklists After opening the package, carefully inspect the contents. If any of the items is missing or appear damaged, contact your dealer.
ENGLISH Chapter 1 — Introduction Caution: When purchasing any of the accessories listed above, purchase only those accessories that are approved for use with your computer. The above accessories are proprietary items. Your system vendor can obtain these approved accessories. If you use items that are not approved for use with this computer, you may cause your computer to malfunction, or to emit or receive electro-magnetic radiation in excess of local regulations.
Introduction — Where to Look For Information Comfortably scroll through documents with the ergonomically designed scrolling button. Where to Look For Information About Your Computer This User’s Manual describes the key elements of your computer. New users can find a simple step-by-step orientation in the Quick Start section of this chapter. About Windows Windows Online Help, found on the Start menu, offers extensive Windows assistance. Tour Windows XP offers an online orientation for new Windows users.
ENGLISH Chapter 1 — Introduction Quick Start Turning on the Computer for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the right side of your computer. 3. Connect the AC adapter power cord to an AC outlet. 4. Slide the cover latch in the direction of the arrows to open the LCD. 5. Open the LCD panel to a comfortable viewing angle. 6. Press the power button to turn on the power. Note: The battery is not fully charged.
Introduction — Loading Windows The following section is for installing the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Your computer will begin loading Windows once you turn on the power. Wait a few seconds for Windows setup to load.
ENGLISH Chapter 1 — Introduction Adjusting the Volume You can adjust the volume with the volume control knob located below the touchpad. Volume control button Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar.
Introduction — Turning off Your Computer Turning off the computer properly is important to maintaining your computer. 1. On the Start menu, click Shut Down. 2. Click the radio button next to Shut Down in the Shut Down Windows screen, and then click OK. If you are going to be away from the computer for a short period, there are ways of conserving power without shutting down the system. See Chapter 5, Power Saving Modes, for details. Warning: Shutting off the computer improperly may result in data loss.
ENGLISH Chapter 1 — Introduction Tips for New Owners Take responsibility for backup Back up files often. Users who need to manage large amounts of data may wish to use backup devices such USB drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook.
Introduction — Tips for New Owners A broken screen or case can be costly to repair. Prevent accidents by carrying the computer in a suitable carrying case. Consider using a lock For added security, consider purchasing a Kensington lock to put into the Kensington lock hole on the left side of your computer (see Chapter 2, Left View). Use the Kensington lock to secure the computer to a desk or table.
ENGLISH Chapter 1 — Introduction 14
ENGLISH Chapter 2 Getting Started
ENGLISH Chapter 2 — Getting Started Hardware and Software This chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system. Slide the screen latch on the front edge of the cabinet towards the right to release the cover latch and open up the computer.
Getting Started — Front View ENGLISH Front View 1. LCD release latch 9. MS/MMC/SD card slot 2. LCD panel 10. Volume control knob 3. Battery 11. Microphone-in jack 4. Keyboard 5. Speakers 12. Audio-out jack for external speakers or headphones 6. Touchpad 13. Power indicators 7. Touchpad buttons 14. Status indicators 8. Scrolling button 15. Power button 16.
ENGLISH Chapter 2 — Getting Started Left View 1 2 3 4 1. Kensington lock hole 2. VGA port external video display port 3. Fax/modem RJ-11 Jack 4. LAN RJ-45 jack 5. PCMCIA card slot 6.
Getting Started — Right View ENGLISH Right View 1. USB ports 2. DVD-ROM/Combo drive 3. DVD-ROM/Combo eject button 4.
ENGLISH Chapter 2 — Getting Started Bottom View 1. Ventilation slots 2. SO-DIMM RAM compartment 3. Battery release button 4.
Getting Started — LED Status Indicators The status indicators in the upper left corner of the keyboard light up when a particular function of the computer is active. Each indicator is marked with a symbol. The computer is reading information CD ROM Drive from the DVD-ROM or the Combo drive. The computer is reading from, or writing to the built-in hard disk. HDD Number-Lock The keyboard is in Num-Lock mode. Caps-Lock The keyboard is in Caps-Lock mode. Scroll-Lock The keyboard is in Scroll-Lock mode.
ENGLISH Chapter 2 — Getting Started Function Keys Hold the Fn key while pressing the numbered function key. Function key Description Fn + F3 Toggles display on/off Fn + F4 Suspend to RAM/HDD Fn + F5 Toggles between LCD/CRT displays Fn + F6 Decreases LCD brightness Fn + F7 Increases LCD brightness Numeric Keypad The embedded numeric keypad consists of ten keys that make number intensive input more convenient. Press to enable or disable the numeric keypad.
Getting Started — Touchpad The touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen. Touchpad buttons Touchpad Scrolling button The instructions listed below describe how to use the touchpad. 1. First, place your fingers on the keyboard in the normal typing position. The touchpad is easily accessible by moving either your left or right thumb off the space bar and on to the touchpad. 2.
ENGLISH Chapter 2 — Getting Started launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “doubleclicking” an object. Dragging There are two ways to drag: • Move the pointer to the desired location then press down the left button. While still holding down the left button, move the pointer to the desired location. Release the button. • Move the pointer to the desired location.
Getting Started — The DVD-ROM, or COMBO Drive 1. Press the button on the front of the drive to open the disk tray and pull the tray open. 2. Place the disk on the tray, label side up. 3. Place the disk on the central spindle and press gently until the disk clicks into place. 4. Slide back the tray until it clicks shut. Removing a Disk 1. Make sure the computer is not accessing the DVD drive. 2. Press the eject button and pull the tray all the way out. 3.
ENGLISH Chapter 2 — Getting Started • Do not bend or drop the discs. • Do not place objects on top of discs. Warning: Do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually. When not in use, keep the tray closed to prevent dust or dirt from entering the drive unit.
Getting Started — Memory 1. The top side of a PC card is usually identified with a label. Insert the card into the slot with the label side up and the edge with pinhole contacts going in first. 2. Insert the card into the slot. You will feel some resistance as the card slides into the back of the slot. Slide the card into the slot. 3. PC cards require drivers, or a program that allows the operating system to use a specific device.
ENGLISH Chapter 2 — Getting Started Note: Use only 1-inch DDR SODIMM (200 pin) modules. Removing a Memory Card 1. Turn off the computer and disconnect the AC adapter. Turn the computer upside down and lay it on a flat surface. 2. Carefully remove the two RAM compartment cover screws and remove the RAM compartment cover. 3. Gently pull tabbed latched in the direction of the arrows (1). The card will pop up slightly. 4. Pull upwards on the card and then slide the card out (2).
Getting Started — The Graphics System ENGLISH 3. Press the card downwards so that it is flat inside the compartment (4). You may hear an audible click as the latches of the connector lock the card in place. 4. Replace the RAM compartment cover and secure it with the two screws. Your notebook computer will automatically detect the change in RAM capacity when it restarts.
ENGLISH Chapter 2 — Getting Started Resolution 1. Click My Computer/Control Panel/Display/Settings. Click the Settings tab. The dialog box indicates the monitor resolution. 2. Use the slide bar to adjust the resolution. Normally, you should use the resolution the LCD or monitor was designed for. Note: Using a lower resolution than the screen was designed for will reduce the area of the display. Using the computer in DOS mode may produce the same effect, because it uses a 640 by 480 resolution by default.
Getting Started — The Graphics System With Windows system, you may use an external monitor simultaneously with your notebook’s LCD. You may also use the external monitor only and disable the LCD or only use the LCD. To do this you may first need to enable the multiple display settings in Windows 98. 1. Open the Control Panel. 2. Double-click Display. The Display Properties window opens. 3. Click the Settings tab. 4. Click the Advanced button. 5. Click the Display Modes tab.
ENGLISH Chapter 2 — Getting Started Tip: To ensure trouble-free video output, the first time you use an external monitor, change the output in the Display Properties dialog box. After successfully switching modes, you may use the video function keys. Note: Light or dark dots may appear on the LCD due to technical limitations of LCD manufacturing. This will not effect normal operation of the LCD.
Getting Started — Communication Components This system provides powerful communication functions, including built-in Fax/Modem and PCMCIA card slot. Fax/Modem A phone jack on the left side of the computer allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax. When using this function, first plug the phone cord into the jack.
ENGLISH Chapter 2 — Getting Started Built-in Wireless Local Area Network The built-in Wireless Local Area Network (WLAN) interface card can provide a quick access without using cables for the connection to the network equipments. The interface card adopts the IEEE 802.11 protocol and uses the 2.4 GHz ISM electric wave frequency band as the transmission interface to set up the communications between the host computer and other computers.
ENGLISH Chapter 3 Making Connections
ENGLISH Chapter 3 — Making Connections Making Connections Your computer is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices such as printers, keyboards, and mice. Refer to documentation included with individual devices for details on connecting these devices to your computer.
Making Connections — Right Side Connectors The fax/modem can transmit data using the 56 Kbps V.90 protocol, and send and receive faxes at 14.4 Kbps. In some countries, local regulations may not permit the use of the fax/modem designed for this system. In this case, you may use a PCMCIA modem. Warning: Plug your modem into an analog telephone jack only. Most homes use analog lines. Do not use digital lines, such as the PBX and ISDN systems found in many offices. Digital lines may damage your modem. 4.
ENGLISH Chapter 3 — Making Connections Front Side Connectors 1. Audio-out Jack Connect a stereo headset or external speakers to this jack to listen to multimedia. 2. Microphone-in Jack Connect a microphone this jack to record audio. 3. MS/MMC/SD 3-in-1 card reader slot The 3-in-1 card reader slot is specially used for the device with a MS/MMC/SD card interface card. Insert the card into the 3-in-1 card reader slot as shown below to securely latch the card into the slot for the reading.
ENGLISH Chapter 4 System Software
ENGLISH Chapter 4 — System Software System Software Software List Operating System Your hard drive already contains all the software you need to operate the computer. Audio and Video Drivers These utility programs and drivers are included for the PC Card drive, the sound system, and the graphics sub-system. DVD Player Application The DVD player application will let you watch DVD movies on your notebook (for DVD-ROM module only).
System Software — System Recovery ENGLISH System Recovery Before you start Your system includes Recovery CD-ROMs. Follow the steps in the appropriate section below to reinstall the operating system, the system software, or add a new hard disk. • The factory has pre-partitioned your system's hard disk, so you may directly install the system software; however, if you change a new hard disk, you must first partition it.
ENGLISH Chapter 4 — System Software Recovering Windows and Original Software If your Windows operating system is lost or damaged, use the Recovery CD (Windows). Enter BIOS setup. Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.) Put the Windows Recovery CD into the CDROM drive and reboot the computer.
System Software — System Recovery Hard drive is not partitioned. When the Microsoft Windows startup menu appears, select (2) Go to MS-DOS PROMPT. Press Enter to repartition your hard disk. At the A:\ prompt, type fdisk and press Enter. Note: If your computer is set to boot from the CDROM drive, “A” refers to your CD-ROM. If you see the message: “Do you wish to enable large disk support (Y/N),” Select “Y.” On the first screen select “Create DOS partition or logical DOS drive.
ENGLISH Chapter 4 — System Software Windows XP Reinstallation Enter BIOS setup. Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.) Put the Recovery CD for Windows XP. Disc#1 into the CD-ROM drive and reboot the computer. When the Microsoft Windows XP. Menu appears, choose option 1: Recovery CD for Windows XP. When prompted, insert the Disc#2. It will take approximately fifteen minutes to complete the installation. Remove the CD-ROM from the drive when the installation is complete.
ENGLISH Chapter 5 Power Management
ENGLISH Chapter 5 — Power Management Power Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps: 1. Plug in the AC adapter. 2. Restart the computer and when the startup screen appears, press Del key to enter the BIOS Setup Utility. 3. In the BIOS Setup Utility, select Advance settings.
Power Management — Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1. Click start/Control Panel/Power Options; then click Power Meter. 2. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status. If you do not see the battery icon, enable it in Start /Control Panel/Power Options. Choose the Advanced tab and click “Always show icon on the taskbar.
ENGLISH Chapter 5 — Power Management • Save your work, turn off the computer and replace the discharged battery with a charged battery (See Changing the Battery below). Do not restart the computer until you have connected to an AC adapter, or replaced the discharged battery with a charged battery. Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge.
Power Management — Power Saving Tips The computer will automatically enter suspend mode when not used for a set period of time. • Selecting the Stand by button in the Shut Down Windows dialog box. • Closing the screen cover (assuming no external monitor has been connected). • Pressing the power button (if enabled in power settings). • Pressing the suspend function key + .
ENGLISH Chapter 5 — Power Management When to Replace the Battery Over time, the battery's capacity gradually decreases. We recommend that you replace your battery when you notice that it begins to store significantly less charge. Changing the Battery Change the main battery pack as follows: 1. Turn off the computer. 2. Close the screen cover and turn the computer over. 3. Slide the side battery latch (1) away from the battery. Continue to hold it until the battery is removed. 4.
Power Management — Heat Considerations The computer's processor has been specially designed to consume little power, and generates very little heat. However, working in a hot environment, or working for long periods may raise the temperature. Your computer takes the following steps to lower temperature: 1. The cooling fan will automatically turn on. You may feel air coming from a vent at the left side when this happens. 2. If the temperature continues to rise, processor activity will be reduced.
ENGLISH Chapter 5 — Power Management 52
ENGLISH Chapter 6 Using the BIOS Setup Utility
ENGLISH Chapter 6 — Using the BIOS Setup Utility Using the BIOS Setup Utility Your notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings.
Using the BIOS Setup Utility — Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Å Æ Select Screen ÇÈ Push the up and down arrow keys to move among selections, then press Enter to make a selection. + - Change Option Tab Select Field F1 General Help F10 Save and Exit ESC Press Esc to exit any section. If you wish to exit the BIOS utility without saving changes, go to the main menu, then press Esc.
ENGLISH Chapter 6 — Using the BIOS Setup Utility The Main Menu BIOS SETUP UTILITY Main Advanced Boot Security System Overview Exit Use [ENTER] , [TAB] Or [SHIFT-TAB] to select a field. AMIBIOS Version : R0.
Using the BIOS Setup Utility — Advanced Menu ENGLISH Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Depending on AC or Advanced Setting Intel® SpeedStep™ tech. [Automatic] Battery powered, CPU Graphics Mode Select [Enabled, 8MB] speed will change Auto DIM function [Enable] base on the Legacy USB Support [Enable] selections.
ENGLISH Chapter 6 — Using the BIOS Setup Utility Boot menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Specifies the boot 1st Boot Device 2nd Boot Device 3rd Boot Device [CDROM: SM-QSI DVD-R] [HDD:PM-FUJITSU MHT2040AT] sequence from the available devices. [Network:Realtek Boot] A device enclosed in Parenthesis has been disabled in the corresponding type menu. ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit V02.
Using the BIOS Setup Utility — Security menu ENGLISH Security menu BIOS SETUP UTILITY Main Advanced Boot Security Settings Security Exit Install or password. Change Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password ←→ Select Screen ↑↓ Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends , Inc.
ENGLISH Chapter 6 — Using the BIOS Setup Utility Exit menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Exit Options Exit system setup Save Changes and Exit after saving the changes. Discard changes and Exit F10 key can be used Discard Changes for this operation. Load Optimal Defaults Load Failsafe Defaults ←→ Select Screen ↑↓ Select Item Enter Go To Sub Screen F1 General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends, Inc.
Using the BIOS Setup Utility — Change User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Change Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter.
ENGLISH Chapter 6 — Using the BIOS Setup Utility 62
ENGLISH Appendix A Frequently A sked Questions
ENGLISH Appendix A — Frequently Asked Questions Frequently Asked Questions Q: My screen seems to time out too quickly. I have to constantly hit a key or move the mouse in order to bring it back. How can I adjust the screen time-out? A: This is part of Windows Power Management. Access Power Management by clicking on Start / Settings / Control Panel / Power Management. Adjust the display time-out by selecting a time next to the Turn off monitor option.
Appendix A — Frequently Asked Questions There is feedback noise coming from my speakers. What can I do? A: Double click on the Speaker icon on the task bar. Then, under Microphone Balance, check the Mute box. Q: Because of a software problem, I was unable to shut down power normally. I pressed the power button to force a power off, but it didn't work. How can I force a power off? A: Make sure you press the power button for at least 4 seconds. Normally, this will force a power off.
ENGLISH Appendix A — Frequently Asked Questions 3. Select “Save Changes and Exit”. When you see the following prompt, choose and then press to restart your computer.
ENGLISH Appendix B Statements
ENGLISH Appendix B — Statements Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix B — Statements This equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. The modem jack of this equipment complies with Sub-part F of Part 68 of FCC rules. The REN is used to determine the quantity of devices that may be connected to the telephone line.
Appendix B — Statements ENGLISH The Telephone Consumer Protection Act of 1991 marks it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine
Appendix B — Statements Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Lowvoltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards. z EN 300 328 V.1.4.
ENGLISH Appendix B — Statements Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. About the Modem The Industry Canada label identifies certified equipment.
Appendix B — Statements Battery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN YOUR AREA. CAUTION FOR ADAPTER THIS NOTEBOOK COMPUTER IS FOR USE WITH MODEL NO. LSE9802X2060 BATTERY CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER.
