User`s manual

ENGLISH
Getting Started — The DVD-ROM, or COMBO Drive
Inserting a Disk
1. Press the button on the front of
the drive to open the disk tray
and pull the tray open.
2. Place the disk on the tray, label
side up.
3. Place the disk on the central
spindle and press gently until the
disk clicks into place.
4. Slide back the tray until it clicks
shut.
Removing a Disk
1. Make sure the computer is not
accessing the DVD drive.
2. Press the eject button and pull
the tray all the way out.
3. Pick up the CD by the edges and
remove the disk from the tray.
Push the tray into the computer
until it closes fully.
Warning: When the computer is reading from a DVD-
ROM/COMBO, the indicator light for the DVD-ROM will
flash on. Do not attempt to remove a disk while
this light is active.
Precautions for Handling DVD-ROM Discs
Keep these precautions in mind when handling DVD-ROM discs.
• Always hold the disc by the edges; avoid touching the surface of
the disc.
• Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.
• Do not write on the surface of the disc.
• Extremes in temperature may damage discs. Store discs in a
cool dry place.
• Do not use benzene, thinners, or cleaners with detergent. Only
use DVD-ROM cleaning kits.
25