Full Product Manual

Assembly and Operation Instructions
P2170_M52164_Rev_May2020_compressed PAGE 9
NEW FEATURE
The SideSpred-Control™ is a new innovation that eliminates the need to use a side deflector, which can adversely affect
your application rate, to prevent material from being spread into flowerbeds, on sidewalks, or driveways. The
SideSpred-Control™ maintains the correct application rate while it is activated, giving you excellent results in seeding or
spreading while controlling the spread pattern on the left side of the spreader. The SideSpred-Control™ is an EarthWay
exclusive.
SideSpred-Control™ OPERATION
The SideSpred-Control™ lever is located under the right side of the hopper. To operate the SideSpred-Control™, slide
the control lever from the front to the back. This will activate the SideSpred-Control™ for a PARTIAL spread pattern and
prevent material from being spread to the left side of the spreader. Position the left wheel of your spreader 4″–6″ from
the sidewalk, flowerbed, or driveway and spread as normal. When you have completed this spreading pass, close the
control lever to “0”, and then open the SideSpred-Control™ by sliding the control lever from back to the front, for a
FULL spread pattern.
HOW TO ORDER SPARE PARTS
All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information
when ordering.

Model Number

Part Number

Part Description
You can contact us by calling [phone] to place an order with a credit card, or purchase online at
https://www.earthway.com/product-category/parts/ Questions? Email us at mailto:[e-mail]