Product Manual

ManualsBrandsEarthWay ManualsLawn & GardenNylon Bag Spreader — 20-Lb. Capacity

Broadcast Spreader

Bag Seeder

MODEL # 2750 ASSEMBLY INSTRUCTIONS

M2750_52198_072020

Your 2750 Seeder / Spreader is pre-assembled at the

factory, leaving only the handle crank and the new bag

supports for you to attach.

To install your bag supports, see the image below.

When attaching the crank, turn the crank onto crankshaft.

It is not necessary to tighten, the crank will tighten itself

as you use it.

Your Earthway seeder/spreader is now ready for use.

Summary of content (5 pages)

PAGE 1
Broadcast Spreader Bag Seeder MODEL # 2750 ASSEMBLY INSTRUCTIONS Your 2750 Seeder / Spreader is pre-assembled at the factory, leaving only the handle crank and the new bag supports for you to attach. To install your bag supports, see the image below. When attaching the crank, turn the crank onto crankshaft. It is not necessary to tighten, the crank will tighten itself as you use it. Your Earthway seeder/spreader is now ready for use.
PAGE 2
Assembly and Operation Instructions CUSTOMER SERVICE 574.848.7941 | SUPPORT@EARTHWAY.COM | www.EARTHWAY.com | 1009 Maple Street, Bristol, IN 46507 ONE YEAR WARRANTY EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc.
PAGE 3
Assembly and Operation Instructions HOW TO ORDER SPARE PARTS All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information when ordering.  Model Number  Part Number  Part Description You can contact us by calling (574) 848-7491 to place an order with a credit card, or purchase online at https://www.earthway.com/product-category/parts/ Questions? Email us at mailto:sales@earthway.
PAGE 4
Assembly and Operation Instructions Hand Crank Spreader Rate Setting Instructions YOU WILL NEED • Tape measure • Pencil & Pad • Scale • Bucket/container To Calculate RATE SETTINGS: (Use the Chart on the next page to fill in numbers)  Determine how much material is to be applied per 1,000 sq./ft. This is determined on the bag based on bag weight and total area of coverage if not directly stated on the bag the recommended number of pounds per 1,000 sq./ft.
PAGE 5
Assembly and Operation Instructions CHART Desired Application Rate (lbs./1,000 sq. ft.) __________ To determine the desired application rate divide the area (sq. ft.) that the bag says it should cover, by the weight of the bag, and then multiply by 1,000. (Example: 5,000 sq. ft. / 25 lbs. = .005 x 1,000 = 5lbs. per 1,000 sq. ft.