Product Manual

ManualsBrandsEarthWay ManualsLawn & GardenNylon Bag Spreader — 20-Lb. Capacity

Please call if you are missing any parts, have diculty in assembly, or have any

questions regarding the safe operation of this product. SUPPORT HOT LINE:

574-848-7491 or 800-294-0671

Appelez SVP si vous manquez n’importe quelles pièces, ont la diculté dedans

l’assemblée, ou ont toutes les questions concernant l’exploitation sûre de ce

produit. LIGNE DIRECTE DE SOUTIEN: 574-848-7491 ou 800-294-0671

Llame por favor si usted está faltando cualesquiera piezas, tienen dicultad

adentro la asamblea, o tiene cualquier pregunta con respecto a la operación

segura de este producto. LÍNEA CALIENTE DE LA AYUDA: 574-848-7491

o 800-294-0671

ASSEMBLY INSTRUCTIONS:

Your 2750 Seeder / Spreader is pre-assembled at the factory, leaving only

the handle crank and the new Bag Supports for you to attach, see the

steps below. To attach the crank, turn crank onto crankshaft. No need to

tighten, just allow the crank to tighten itself as you use it. Your seeder /

spreader is now ready for use.

INSTRUCCIONES DE ASAMBLEA:

Su Sembradoras 2750 / Esparcidor de es pre-ensamblados en la fábrica,

dejando sólo a la manivela y la bolsa de nuevos soportes para que usted

pueda conectar, ver los siguientes pasos. Para colocar la manivela, gire la

manivela en el cigüeñal. No hay necesidad de apretar, sólo permite a la

manivela a sí mismo como ajuste de usar lo. Su sembradora / esparcidor

ya está listo para su uso.

INSTRUCTIONS D’ASSEMBLÉE :

Votre 2750 Semoir à / Épandeur est pré-assemblé en usine, ne laissant

que la manivelle et le sac de nouveaux supports pour vous joindre, voir

les étapes ci-dessous. Pour xer la manivelle, tourner la manivelle sur

le vilebrequin. Pas besoin de serrer, juste permettre la manivelle de se

serrer comme vous l’utilisez. Votre semoir / épandeur est maintenant prêt

à utiliser.

At crease

Push up slightly

STEP 1

STEP 2

STEP 3

ASSEMBLY AND OPERATING

INSTRUCTIONS

for 2750 Broadcast Spreader

INSTRUCCIONES DE LA ASAMBLEA

Y DE FUNCIONAMIENTO

para 2750 Sembrador o Esparcidor

ASSEMBLÉE ET CONSIGNES

D’UTILISATION

pour 2750 Épandeur Centrifuge

3-2016 PT. #52198

Bag Type

Summary of content (5 pages)

PAGE 1
Please call if you are missing any parts, have difficulty in assembly, or have any questions regarding the safe operation of this product. SUPPORT HOT LINE: 574-848-7491 or 800-294-0671 Appelez SVP si vous manquez n’importe quelles pièces, ont la difficulté dedans l’assemblée, ou ont toutes les questions concernant l’exploitation sûre de ce produit.
PAGE 2
OPERATING INSTRUCTIONS: Before filling the bag, become familiar with the operation of your spreader. ;; Obtain proper setting for material to be used from the rate-setting chart from the underside of the unit. ;; Loosen wing nut and move setting indicator to proper setting. (When indicator is all the way forward it will be on setting number 1). Tighten wing nut after adjustment. ;; To fill, make sure slide opening is in closed position. Fill bag approximately 1/2 to 2/3 full.
PAGE 3
Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 Phone: 800-294-0671 or (574) 848-7491 www.earthway.com 1 4 2 5 6 3 7 9 17 8 10 11 16 2750 BAG SEEDER - Parts List 12 13 15 14 FULL Rate (one pass) 18 HALF Rate (two passes) SPREAD WIDTH SETTING RATE LBS.
PAGE 4
Hand Crank Spreader Rate Setting Instructions FINISH Tape measure Pencil & Pad Scale Bucket/container To Calculate RATE SETTINGS: (Use the chart on page 2 to fill in numbers) START R • • • • EarthWay YOU WILL NEED: 50 FEET 55 Determine how much material is to be applied per 1,000 sq./ft. Chest Type This is determined on the bag based on bag weight and total area of coverage if not directly stated on the bag the recommended number of pounds per 1,000 sq./ft.
PAGE 5
Spreading Paths FULL Rate (one pass) HALF Rate (two passes) CHART Desired Application Rate (lbs./1,000 sq. ft.) _____________ To determine the desired application rate divide the area (sq. ft.) that the bag says it should cover, by the weight of the bag, and then multiply by 1,000. (Example: 5,000 sq. ft. / 25 lbs. = .005 x 1,000 = 5lbs. per 1,000 sq. ft.