Operation and Assembly Manual for the EarthWay M20 12-volt ® ATV Broadcast Spreader Pt.
EarthWay ® Electric Spreaders Model M20 1. Always wear protective clothing, eyewear, and dust mask to prevent contact with chemicals and other materials being applied with this machine. 2. Remove any material in the hopper before lifting or detaching this machine from the vehicle. 3. Care must be taken when lifting this machine so as not to cause personal injury or equipment damage. Never attempt to install this machine to the vehicle alone.
Mounting locations How to attach to your ATV: Position the M20 centered on either the front or rear luggage rack on your ATV. Next using the included “Double J-Bolts” connect the rear cross bars to the luggage rack cross bar closest to the seat or handlebars. Using two “Double J-Bolts” attach the M20 to the luggage rack securing it to the outer most rail on the luggage rack. Tighten all fasteners and cut any excessive bolt lengths that extend beyond the nuts on the “J-Bolts” and smooth if necessary.
EarthWay ® Electric Spreaders Rate Setting Worksheet Desired Application Rate (lbs/1,000 sq ft) _____________ To determine the desired application rate divide the area (sq ft) the bag should cover by the weight of the bag, then multiply by 1,000. (example: 5000 sq ft / 25 lbs = .
EarthWay ® Products, Inc. P.O. Box 547 Bristol, Indiana 46507 (574) 848-7491 or 800-294-0671 www.earthway.com HOW TO ORDER SPARE PARTS All spare parts listed herein may be ordered direct from the manufacturer, EARTHWAY PRODUCTS, INC. Be sure to give the following information when ordering. 1. Model Number 2. Part Number 3. Part Description Call (574)848-7491 or write for current prices.
EarthWay Products, Inc. P.O. Box 547 Bristol, Indiana 46507 USA EC DECLARATION OF CONFORMITY (Machinery Directive & Electromagnetic Compatibility Directives) Herewith we declare that the machinery described below is in accordance with the relevant health and safety requirements of the EC Council Directives concerned with Machinery and Electromagnetic Compatibility. No alterations are to be made to the machine without prior consultation and approval of EarthWay Products, Inc.
