Installation Guide

4
EarthWerks® ▪ 10850 Train Court Houston, Texas 77041-6208 USA ▪ www.earthwerks.com
Last Updated 2017 ▪ EarthWerks®Vinyl Flooring ▪ Installation Instructions
Preventative maintenance is a must with any type of flooring. Please use entry mats to stop as much dirt prior to entry
of the building. Make sure all furniture is well protected, avoiding rubber products as they can cause stains. Use hard
plastic or felt pads under heavy furniture to prevent point loads. Use flat, polished metal glides with a minimum 1”
diameter under chairs and stools. These should have a rounded edge and pivot to remain in flat contact with the floor.
Non-staining felt pads can be used provided they are changed on a regular basis to prevent dirt, debris and sand buildup.
Wide, non-staining casters at least 2” in diameter or floor protectors should be used on rolling furniture such as office
chairs. Also sweeping and damp mopping the floor on a regular basis and a diligent inspection of the floor protection
installed on the furniture can be helpful. Never slide heavy furniture over unprotected floors.
These instructions are general guidelines for the proper procedures for installing and maintaining this flooring product.
For detailed instructions on Installation and Maintenance, please contact:
EarthWerks® Technical Service
800-275-7943
[e-mail]