Full Product Manual

FEATURES
PRODUCT SPECIFICATIONS
Model #BLR20075
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 V, 60 Hz, 7.5 Amp
No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11000/14000 RPM
Air Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 MPH / 200 MPH
Tube Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 in. (550mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.28 lb. (1.94 kgs)
- Assembly required
- Two Speed
ON/OFF SWITCH / SPEED CONTROL
3
FRONT BLOWER TUBE
REAR BLOWER TUBE
HANDLE
ASSEMBLY/OPERATION
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box.
Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage
occurred during shipping. Do not discard the packing material until
you have carefully inspected and satisfactorily operated the
product .
PACKING LIST
 Blower
 Blower Tubes
 Operator’s manual
ASSEMBLY
1. Insert the rear blower tube into the front blower tube
until the clip on rear blower tube locks into position.
2. Insert the assembled blower tube to the blower unit
until the clip on the motor enclosure is locked into
position.
3. To remove, press in on the clips then remove in the
reverse direction.
WARNING: Make sure the blower tube is fixed in position
before operating the blower.