OPERATOR'S MANUAL CORDLESS 18 VOLT CHAIN SAW This product is covered by U.S. patents and other international patents Copyright All Rights Reserved. CCS30008 Your chain saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. Thank you for your purchase.
IMPORTANT SAFETY WARNINGS Save these instruc~ons and review frequently prior to use and in instructing others. TO REDUCE RISK OF INJURY: Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual.
I I ASSEMBLY UNPACKING If any parts are damaged or missing. please call 1-800-313-5111 for assIstance. This product requires no assembly. PACKING LIST Carefully remove the product and any aCt.l<>ssoties from the box Make sure that ali items liS/ed in !he packIng list are included. Inspect the product carefully to make sure no breakage or damage occurred duling shipping.
I OPERATING CUTTING INSTRUCTIONS Proper Cutting Stance FELLING A TREE Weight Should be balanced with both feel on solid ground. When buc~;ng and felling operations are being perfonmed by two or more persons, at the same lime, \he felling operaton should be separated from the bucking operation by a distance of at least twice the height of the tree being felled. Trees should not be felled in a manner thal would endanger any person, striKe any utility line or cause any property damage.
OPERATING CUTTING INSTRUCTIONS As the tree starts to fall, step Ihe chain saw and put it down immediately. Relreat along the cleared path. but watch the action In case something tails your way. Be alert fer ovemead limbs or branches that may fail and watch your fo03ng. WA.RNING: Never cut through to the notch When making a back-cut The hinge contmls the fall of the tree, this is a section of wood between the notch and back.;::ut. LlMBING Umbing is removing branches from a falien tree.
OPERATING CHAIN TENSION AND MAINTENANCE CHAIN TENSION lilt file away from the stael on aacl1 return stroke. Stoo me engine before setting the chain tension. Ma"'e sure the guide bar screw is loosened to finger tigh~ tum 1t\e chain tensloner ctockwise to toosion the chain. A cold chain wi~ be oorrectly ten sioned when there is no slack on the underside of the guide bar, the cI1ain is snug, bul it can be turned by hand wHhoul binding.
CHARGING THE BATIERY PACK Charge the battery paCk only with the charger provided.
[ I MAINTENANCE If you drop the chain saw. carefully inspect it for damage. If the blade is bent, housing cracked. or handles broken or if you see any other condition that may affect the saw's operation, contact your local Authorized Service Center for repairs before putting it back into use, LUBRICATION SYSTEM The chain is a~tomatiOOlly lubricated. Use only new chain oil specifica!ly formulated for chainsaws. Never use wasted oil, low quality oil, or insufficient oil.
I FEATURES PRODUCT SPECIFICATIONS CCS300011 .... 18 V, DC Only Input Bar Length.. Weight. .8" Oregon Bar . .5.9 lb.
WARRANTY LIMITED WARRANTY FOR CORDLESS ELECTRIC MODELS This product is manufactured for The Great States Corporation/American Lawn Mower Company.
