MSDS

SDS - NCM18650
REVISION DATE:2015-1-27
Flash Point: N/A.
Auto-Ignition Temperature: N/A. !
Extinguishing Media
CO2 , Dry chemical.
Special Fire-Fighting Procedures
Self-contained breathing apparatus.
Unusual Fire and Explosion Hazards
Cell may vent when subjected to excessive heat-exposing battery contents.
Hazardous Combustion Products
CO, CO2, other metallic oxide fumes.
In case of PVC sleeved products, the combustion releases chloride gas.
Steps to be Taken in case Material is Released or Spilled
If the battery is accidental broken and leaks out, wipe it up with a cloth, and dispose of it in
a plastic bag and put into a steel can. The preferred response is to leave the area and
allow the batteries to cool and vapors to dissipate. Provide maximum ventilation. Avoid skin
and eye contact or inhalation of vapors. Remove spilled material with absorbent.
Waste Disposal Method
It is recommended to discharge the battery to the end, recycle copper and other metal,
handing in the abandoned batteries to related department unified, and dispose of the
batteries in accordance with approved local, state, and federal requirements. Consult
state environmental protection agency and/or federal EPA.
3
5. FIRE-FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES