Replacement Part List

PARTS LIST

Key no. Description

01 Mainframe Assembly

02 Hang Hooks

03 Nozzle Cleaning Pin

04 Soap Bottle

05 Spray Lance

06 Gun Handle

07 High Pressure Hose Assembly

MAINTENANCE

If you drop the washer, carefully inspect it for damage. If you see

any condition that may affect the washer’s operation, contact your

local Authorized Service Center for repairs before putting it back

into use.

CAUTION: Do not at any time let brake fluids, gasoline,

petroleum-based products, penetrating oils, etc., come in contact

with plastic parts. They contain chemicals that can damage, weaken

or destroy plastic.

Fertilizers and other garden chemicals contain agents which greatly

accelerate the corrosion of metals. Do not store the tool on or adja-

cent to fertilizers or chemicals.

If the nozzle becomes clogged it will cause the pump pressure to increase

and possibly distort the spray pattern. Clean the nozzle immediately if

this should this happen.

Remove the nozzle from the spray lance.

Clear the nozzle with the nozzle cleaning pin.

Flush the nozzle with water.

Reconnect the nozzle to the spray lance.

If the nozzle is still clogged, repeat the above steps.

WARNING: Use the nozzle cleaning pin only with the nozzle

disconnected from the spray lance. Failure to heed this warning could

result in serious injury.

IMPORTANT: To assure product SAFETY and RELIABILITY,

repairs, maintenance and adjustment should be performed by a qualified

individual using identical replacement parts.

CALL US FIRST !!

Call us first with questions about operating or maintaining your pressure washer at 1-800-313-5111

between 7:30 a.m. – 4:30 p.m. Eastern Standard Time, or send emails to earthwise@reelin.com.

PAGE 1
MAINTENANCE If you drop the washer, carefully inspect it for damage. If you see any condition that may affect the washer’s operation, contact your local Authorized Service Center for repairs before putting it back into use. If the nozzle becomes clogged it will cause the pump pressure to increase and possibly distort the spray pattern. Clean the nozzle immediately if this should this happen. Remove the nozzle from the spray lance. Clear the nozzle with the nozzle cleaning pin. Flush the nozzle with water.