Replacement Part List

PRODUCT SPECIFICATIONS

Model: TC70090

Power supply voltage:

120 V-60 Hz

Working width:

12-

Tine Speed:

320 RPM

Working depth max:

Power Consumption:

9 Amp

No.

Description

No.

Description

Upper handle section

Wheel frame lock pin

Switch box and power cable assembly

Wheel

Cord retainer

Wheel hub cap

Cable clip

Protective shield

Wing nut

Tine assembly, A

PAGE 1
PRODUCT SPECIFICATIONS Model: TC70090 Power supply voltage: 120 V-60 Hz Working width: Tine Speed: 320 RPM Working depth max: Power Consumption: 1 9 Amp 12IN 8IN 16 15 14 No. Description No.
PAGE 2
6 Carriage bolt M6 x 45 14 Tine assembly, B 7 Center handle section 15 Motor housing 8 Lower handle section - I 16 Lower handle section II ASSEMBLY
PAGE 3
This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
PAGE 4
Switch box cover This product must be assembled correctly before use. 1. Remove the screws (M5 X 12) and washers from each end of the wheel frame axle. Assemble the wheels onto the axle, then install washers and screws (M5 X 12) to secure. (Fig. 2-1) 2. Press the hub caps into the wheels and cover the ends of the axles. You may use a hammer to seat them securely into the wheels. (Fig. 2-1) 3. To lower wheel frame, push the lock button on back of motor housing to release the frame (Step A).