User's Manual

SPECIFICATIONS
37 Wilton Rd. Milford, NH 03055
[phone]
[e-mail]
earthworksaudio.com
© 2020 Earthworks, Inc
To guarantee your microphone provides years of performance, follow these guidelines:
• Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it
in from the cold.
• Rough handling may damage the microphone even if no markings are visible.
• When not in use, keep the microphone in its box.
If you encounter issues while using your Earthworks Audio microphone, please make sure that:
• Your USB cable is well connected on both ends.
• Your microphone is confirmed as an input device on your computer.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
PROPER MAINTENANCE
WARRANTY
The ICON and ICON Pro carry a two-year limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: [e-mail].
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
WE'RE HERE
TO HELP
For anything else, we're a phone call or email away. Please feel free to contact us by email at sales@
earthworksaudio.com, or by phone at (603)-654-2433.
ICON
Frequency Response 20Hz-20kHz
Polar Pattern Cardioid
Peak Acoustic input 132dB SPL
Power Source USB Bus Power
Power Consumption 70 mA at 5V (Bus Power)
Signal-to-Noise Ratio 70dB (A weighted)
Typical Headphone
impedance
16 Ohms
Headphone Output Power 50 mW (at 16 Ohms)
Color Stainless Steel
Dimensions 5.53" x 1.6"
Weight 1.5lb