Manual

• Unclip coolant line from top radiator shroud, and

remove upper radiator shroud by removing 4 retaining

bolts (10mm) (fig. 3a & b) Upper shroud will not be

reused.

• Raise car, remove wheels from car.

• From below, we will be removing the hardware holding the front fascia to the radiator support and

intake air shroud. The front fascia will NOT be removed. To allow for access to this area, remove the

following :

• The 5 - 7mm screws from lower intake area of front

fascia (Fig 4)

• Remove 2 – 10mm nuts from behind air dam

(fig. 5)