Manual

• Remove center section of front air dam by removing 3-
10mm screws in front of air damn, (pic) and 2 - 7mm
underneath fascia. Remove front air dam from car.
(fig. 6)
• Remove passenger side brake duct housing by
removing the two retaining clips. Outermost
7mm screw, and 3
rd
screw from side of car.
(Fig. 7)
• We are now removing the intake shroud and horns
inside the nose. Using a fork tool, remove 8 black
retaining clips (on sides) (fig. 8), and 4 - 7mm
screws on lower front air shroud. (fig. 9). Remove
shroud from car. (fig 9a)
6
7
8
9
9a