Manual

• From the top of the car, remove upper radiator shroud taking car not to damage AC condenser or lines.
Take the time to clean any debris from AC condenser and radiator area at this point.
• Unclip front 1 inch coolant line from top front
shroud, as well as fan harness from passenger
side of shroud. Do not remove from car as we
are preparing for the removal of fan assembly.
• Remove oil cooler lines (if so equipped) from
radiator by using a pick tool to remove retaining
clip and pull lines straight out from radiator.
Save clips for reinstallation. Use catch basin to
capture any draining oil. (fig 14)
• Z51 cars, or cars equipped factory transmission
coolers may need to remove 10mm retaining clip
from oil pan accessible between leaf spring and
front engine cradle. (fig 15) Save all hardware for
reinstallation
• Carefully remove fans from bottom of car. This is a tight
area. Be sure not to pinch any lines or harnesses during
removal. Save all hardware for reinstallation. (fig 16)
14
15
16