Manual

Pinning the Crank

• Loosen the 4 nuts supporting the front

engine cradle assembly with a 21mm

socket. DO NOT REMOVE NUTS

FROM SUPPORT BOLTS. The goal is to

drop the front cradle assembly

approximately 3/4 of an inch to prepare

for removal of the rack. Use a chisel or

socket to space down cradle as shown.

(fig 17)

• Remove two bolts that hold the power steering cooler

to engine cradle with a 10mm socket. (fig. 18)

• Remove tie rod ends (18mm socket) and

remove from spindles. (fig 19)

• Remove 11mm bolt from steering knuckle (pic). Slide

knuckle off of rack. DO NOT TURN STEERING

WHEEL AFTER REMOVAL OF NUT. (fig. 20)