Manual
• With an 18mm wrench remove top pressure
line from power steering rack. (fig. 21)
• Remove 10mm bolt holding drivers side front brake
line to engine cradle. (fig 22) Free bracket from
cradle. Save all hardware for reinstallation.
• Remove power steering return line with 18mm
wrench.
• Remove clamp that holds power steering lines
(fig 23) to cooler and remove cooler. Retain
return line from cooler to rack for future
installation.
• Unplug electrical connector from rack.
(fig 23)
• Remove two 13mm bolts holding ABS bracket
to engine cradle. (fig 24)
21
22
23
24