SDS

ManualsBrandsEast Penn ManualsAutomotiveUniversal Terminal for Post Terminal Batteries

PAGE 1 OF 6 East Penn Manufacturing

Co.

SAFETY DATA SHEET

EPM LEAD ALLOY PARTS

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

EPM Lead Alloy Parts

MANUFACTURER:

East Penn Manufacturing Co.

ADDRESS:

Deka Road

Lyon Station, PA 19536 USA

EMERGENCY TELEPHONE NUMBERS:

US/CN: CHEMTREC 1-800-424-9300

Outside US/CN: CHEMTREC 1-703-527-3887

NON-EMERGENCY HEALTH/SAFETY

INFORMATION:

610-682-6361

PRODUCT USE:

Lead acid battery component.

SECTION 2: HAZARDS IDENTIFICATION

GHS Classification:

Health

Environmental

Physical

Acute Toxicity – Category 4

Reproductive – Category 1A

Carcinogenicity (lead)– Category 1B

Carcinogenicity (arsenic)– Category 1A

Target Organ Toxicity – Category 2

Specific Target Organ Toxicity

(Repeated exposure) – Category 2

Aquatic Chronic – 1

Aquatic Acute - 1

Not Classified

GHS Label: EPM Lead Alloy Parts

Signal Word: DANGER !

Summary of content (6 pages)

PAGE 1
SAFETY DATA SHEET EPM LEAD ALLOY PARTS SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: EPM Lead Alloy Parts MANUFACTURER: ADDRESS: East Penn Manufacturing Co. Deka Road Lyon Station, PA 19536 USA EMERGENCY TELEPHONE NUMBERS: US/CN: CHEMTREC 1-800-424-9300 Outside US/CN: CHEMTREC 1-703-527-3887 NON-EMERGENCY HEALTH/SAFETY INFORMATION: 610-682-6361 PRODUCT USE: Lead acid battery component.
PAGE 2
SAFETY DATA SHEET EPM LEAD ALLOY PARTS Hazard Statements Health Harmful if swallowed, inhaled, or in contact with skin. May damage fertility or unborn child if ingested or inhaled. May cause damage to central nervous system, blood and kidneys through prolonged or repeated exposure if ingested or inhaled. May cause cancer if ingested or inhaled. May cause harm to breast-fed children. Environmental Very toxic to aquatic life with long lasting effects. Physical Obtain special instructions before use.
PAGE 3
SAFETY DATA SHEET EPM LEAD ALLOY PARTS Additional Information Fire-fighting water runoff and dilution water may be toxic and may cause adverse environmental impacts. SECTION 6: ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Always use good hygiene practices when handling lead and it’s compounds. Recommend practice includes showering at the end of each work shift, lead contaminated clothing should be properly laundered, and wash thoroughly after handling, and before eating, drinking, and smoking.
PAGE 4
SAFETY DATA SHEET EPM LEAD ALLOY PARTS VAPOR DENSITY (AIR = 1): SPECIFIC GRAVITY (H 2 O = 1): EVAPORATION RATE (nBuAc=1): SOLUBILITY IN WATER: FLASH POINT: AUTO-IGNITION TEMPERATURE: LOWER EXPLOSIVE LIMIT (LEL): UPPER EXPLOSIVE LIMIT (UEL): PARTITION COEFFICIENT: VISCOSITY (poise @ 25° C): DECOMPOSITION TEMPERATURE: NA o 11.
PAGE 5
SAFETY DATA SHEET EPM LEAD ALLOY PARTS Mobility of metallic lead between ecological compartments is low. Bioaccumulation of lead occurs in aquatic and terrestrial animals and plants, but very little bioaccumulation occurs through the food chain. Most studies have included lead compounds, not solid inorganic lead.
PAGE 6
SAFETY DATA SHEET EPM LEAD ALLOY PARTS This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the SDS contains all the information required by the Controlled Products Regulations. NPRI and Ontario Regulation 127/01 This product contains the following chemicals subject to the reporting requirements of Canada NPRI +/or Ont. Reg.