Installation Guide

ANTIQUE DINETTE CHAIR WITH CUSHION SEAT
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the
following hardware:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
1
Long bolt
(M6x80mm)
4
2
Medium bolt
(M6x60mm)
4
3
Short bolt
(M6x40mm)
2
4
Lock Washer
(Ф6.5XM9)
10
5
Flat Washer
(Ф6.5xM19)
10
6
Allen Key
(4mm)
1
STEP 1
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen Key (6).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to make sure
the chair is level and then tighten the bolts.
X2