Installation Guide

ANTIQUE TABLE 36" ROUND WITH
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take
the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please
separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following
parts:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
A Top 1 B Leg 4
C Pedestal 1 D Cross piece 1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the
following hardware:
NO
Description
Qty
Sketch
NO
Description
Q
ty
Sketch
1
Large flat
washer
( Φ8.5xΦ19mm)
4 2
Large lock
washer
( Φ8.5xΦ11mm)
4
3
Hexagon nut
(M8x13mm)
4 4
Wrench
(M13mm)
1
5
Small flat
washer
( Φ6.5xΦ13mm)
4 6
Small lock
washer
( Φ6.5xΦ9mm)
12
7
Bolt
(M6x35mm)
12 8
Allen key
(M4)
1
9
Medium flat
washer
( Φ6.5xΦ16mm)
8