Installation Guide

EASTWEST PUB STOOL WITH UPHOLTERED SEAT
- 4 -
STEP
2
Attach front legs (C-L) and (C-R) to the seat frame. Use bolts (2), washers (4) and (5) .Tighten with Allen Key (6).
Place front stretcher (E), side stretchers (D-L) and (D-R) between front and back legs, use the screw driver to
tighten the screws (7) as shown below.
Note: DO NOT tighten any of the bolts, until Place front stretcher (E), side stretchers (D-L) and (D-R) between
front and back legs the chair is assembled, then tighten the bolts and the screws.