Owner’s Manual Soundbar MSB4550 Magnavox is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America. Soundbar MSB4550_DFU_20140522.
Soundbar MSB4550_DFU_20140522.
Table of Connects 1 2 3 4 5 6 7 Notice........................................................................................................................................................2 1.1 Notice of Compliance..............................................................................................................................................2 1.2 Trademark.......................................................................................................................................
1 Notice This section contains the legal and trademark notices. 1.1 Notice of Compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two condition: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1.2 Trademarks Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Funai Electric Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. 2 Important Read and understand all instructions before you use your SoundBar.
•• •• •• •• •• •• • 4 moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storm or when unused for long periods of time. Refer all servicing to qualified service personnel.
2.2 Care of the environment • • This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed liter ature closely to prevent operating and maintenance problems.
3 Your SoundBar 3.1.2 Back connectors of main unit Connect other devices to your SoundBar. Congratulations on your purchase. 3.1 Main unit SUBWOOFER a 3.1.1 Front panel of main unit a SOFTWARE UPGRADE b AC IN f e AUX IN b POWER AUX INPUT LINE OPTICAL PAIR OPTICAL IN c LINE IN d a SUBWOOFER Connect to the supplied subwoofer. a POWER ( Standby indicator ) When the SoundBar is on standby ,the standby indicator is red.
3.2 Remote control a b f c d d e a 3.2.1 Replace battery 1 2 3 Open the battery compartment. Insert one CR2025 battery, with the polarity (+/-) as indicated. Close the battery compartment. Warning •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. •• The product/remote control may or may not contain a coin/button type battery, which can be swallowed.
4 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. 4.2 Wall mount the SoundBar (optional). Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3.
4.3 Connections 4.3.2 Connect audio from other device 4.3.1 Connect to TV Connect your SoundBar to a TV through line in cable. You can listen to audio from TV programs through your SoundBar. LINE IN Play audio other devices through your Soundbar speakers. Note •• During play, do not plug out the audio cable. INPUT Connect audio through a digital optical cable(Not supplied).
5 Use your SoundBar 5.2 Choose your sound This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. 5.1 Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press on remote control. »» When the mute on, the POWER indicator on the front panel of main unit blinks in red.
4 5 Select and play audio files or music on your bluetooth device. • During play, if a call is coming, music play is paused. Play resumes when the call ends. To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
6 Product technical data Specifications and design are subject to change without notice. Specifications Amplifier RMS Total output power: 47 W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 1000mV • LINE IN: 500mV Bluetooth • Bluetooth profiles: A2DP, AVRCP • Bluetooth version: 3.0 + EDR Main unit • Power supply: 120V~, 60 Hz • Power consumption: 18 W • Standby power consumption: ≤ 0.
7 Troubleshooting To keep the warranty valid, never try to repair the product yourself. Malfunctions may occur with any electrical equipment. This must not always involve a defect of the device. Therefore, check the following table to see if you can eliminate the problem yourself. Malfunction Possible cause/ Elimination The SoundBar does not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. No sound from SoundBar speakers.
14 Soundbar MSB4550_DFU_20140522.